error: DBA object is already formed from a consensus peakset
1
0
Entering edit mode
ahua217 ▴ 10
@ahua217-24323
Last seen 3.7 years ago

Hello! I have a DBA object like below

enter image description here

And I want to generate a venn plot like

enter image description here

But I got errors after I used

consKRNMWnocml <- dba.peakset(KRNMWnocml, consensus=DBA_CONDITION)

Error in dba.peakset(KRNMWnocml, consensus = DBA_CONDITION) : DBA object is already formed from a consensus peakset!

If I directly use

 dba.plotVenn(KRNMWnocml,KRNMWnocml$masks$consensus)

Error in names(x) <- value : 'names' attribute [4] must be the same length as the vector [3]

If I check

KRNMWnocml$masks$consensus

NULL

If I check with capital C in $Consensus

KRNMWnocml$masks$Consensus

KWScr_2 KWsh5_2 KWScr_1 KWsh5_1 NWScr_vs_sh5_2 NWScr_vs_sh5_1 TRUE TRUE TRUE TRUE TRUE TRUE

If I used

dba.plotVenn(KRNMWnocml,KRNMWnocml$masks$Consensus)

Error in dba.plotVenn(KRNMWnocml, KRNMWnocml$masks$Consensus) : Too many peaksets in mask.

How can I get the Venn plot in plan? (I also tried "contrast" in other DBA and got a different Venn plot, but I still want to let dba.peakset() and consensus work in my hands.) Thank you very much!
DiffBind • 2.6k views
ADD COMMENT •
0
Entering edit mode
Rory Stark ★ 5.2k
@rory-stark-5741
Last seen 4 weeks ago
Cambridge, UK

There are a number of ways you could have reached this point, depending on how you constructed the KRNMWnocml object. In order to use peak information for each sample, you need to have a) initially created the object by loading peak calls for each sample and b) had dba.count() automatically generate a consensus peakset (missing paramater peaks). . The most likely way to have the situation you describe is if you supplied a consensus peakset (peaks=) to dba.count()``, in which caseDiffBind` does not know which peaks were called in which samples.

Specifically, the call to dba.peakset()with consensus=DBA_CONDITION should be made before calling dba.count(), as it is based on peak, and not count, information.

The $masks$Consensus should be capitalized.
ADD COMMENT •
0
Entering edit mode

Thank you so much Dr. Stark. In my last post, I simply used KRNMWnoc <- dba.count(KRNMWnoc),dba.normalize() and dba.analyze(), before dba.peakset(). I will switch the step of dba.peakset() before dba.count() for a try.

ADD REPLY •
0
Entering edit mode

Dr. Stark, I met new problem if I used

pKRNMWnoc <- dba.peakset(dbaKRNMWnoc,consensus=DBA_CONDITION)

Add consensus: Scramble Add consensus: sh5 Error in read.table(fn, skip = skipnum) : no lines available in input

It may be because sample KWsh5_1 is from a 0-peak file. If I let the corresponding Peaks in data sheet empty, there is a warning and the DBA object could not be created.

dbaKRNMWnoc <- dba(sampleSheet="KRNMWnoc.csv", dir="/Volumes/B2T/Oct17BT")

KWScr_2 Weri_Rb1 Scramble H3K36Me2 2 raw KWsh5_2 Weri_Rb1 sh5 H3K36Me2 2 raw KWScr_1 Weri_Rb1 Scramble H3K36Me2 1 raw KWsh5_1 Weri_Rb1 sh5 H3K36Me2 1 raw Error in file(con, "r") : cannot open the connection In addition: Warning messages: 1: In file(con, "r") : 'raw = FALSE' but '/Volumes/B2T/Oct17BT/' is not a regular file 2: In file(con, "r") : cannot open file '/Volumes/B2T/Oct17BT/': it is a directory

If I replaced the empty/0-peak file into a manually created bed file containing only 1 peak with 0 signal strength, the DBA object can be smoothly created but the step of dba.peakset() got the problem as mentioned.

ADD REPLY •
0
Entering edit mode

Could you send the output of sessionInfo() so I can confirm what versions you are working with?

ADD REPLY •
0
Entering edit mode

Thank you Dr. Stark. Here are the information from sessionInfo()

sessionInfo() R version 4.0.3 (2020-10-10) Platform: x86_64-apple-darwin17.0 (64-bit) Running under: macOS High Sierra 10.13.6

Matrix products: default BLAS: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib LAPACK: /Library/Frameworks/R.framework/Versions/4.0/Resources/lib/libRlapack.dylib

locale: [1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages: [1] parallel stats4 stats graphics grDevices utils datasets methods base

other attached packages: [1] DESeq2_1.30.0 DiffBind_3.0.7 SummarizedExperiment_1.20.0 [4] Biobase_2.50.0 MatrixGenerics_1.2.0 matrixStats_0.57.0
[7] GenomicRanges_1.42.0 GenomeInfoDb_1.26.1 IRanges_2.24.0
[10] S4Vectors_0.28.0 BiocGenerics_0.36.0

loaded via a namespace (and not attached): [1] backports_1.2.0 GOstats_2.56.0 BiocFileCache_1.14.0 plyr_1.8.6
[5] GSEABase_1.52.0 splines_4.0.3 BiocParallel_1.24.1 ggplot2_3.3.2
[9] amap_0.8-18 digest_0.6.27 invgamma_1.1 GO.db_3.12.1
[13] SQUAREM_2020.5 magrittr_2.0.1 checkmate_2.0.0 memoise_1.1.0
[17] BSgenome_1.58.0 base64url_1.4 limma_3.46.0 Biostrings_2.58.0
[21] annotate_1.68.0 systemPipeR_1.24.2 askpass_1.1 bdsmatrix_1.3-4
[25] prettyunits_1.1.1 jpeg_0.1-8.1 colorspace_2.0-0 blob_1.2.1
[29] rappdirs_0.3.1 apeglm_1.12.0 ggrepel_0.8.2 dplyr_1.0.2
[33] crayon_1.3.4 RCurl_1.98-1.2 jsonlite_1.7.1 graph_1.68.0
[37] genefilter_1.72.0 brew_1.0-6 survival_3.2-7 VariantAnnotation_1.36.0 [41] glue_1.4.2 gtable_0.3.0 zlibbioc_1.36.0 XVector_0.30.0
[45] DelayedArray_0.16.0 V8_3.4.0 Rgraphviz_2.34.0 scales_1.1.1
[49] pheatmap_1.0.12 mvtnorm_1.1-1 DBI_1.1.0 edgeR_3.32.0
[53] Rcpp_1.0.5 xtable_1.8-4 progress_1.2.2 emdbook_1.3.12
[57] bit_4.0.4 rsvg_2.1 AnnotationForge_1.32.0 truncnorm_1.0-8
[61] httr_1.4.2 gplots_3.1.1 RColorBrewer_1.1-2 ellipsis_0.3.1
[65] pkgconfig_2.0.3 XML_3.99-0.5 dbplyr_2.0.0 locfit_1.5-9.4
[69] tidyselect_1.1.0 rlang_0.4.9 AnnotationDbi_1.52.0 munsell_0.5.0
[73] tools_4.0.3 generics_0.1.0 RSQLite_2.2.1 stringr_1.4.0
[77] yaml_2.2.1 bit64_4.0.5 caTools_1.18.0 purrr_0.3.4
[81] RBGL_1.66.0 xml2_1.3.2 biomaRt_2.46.0 compiler_4.0.3
[85] rstudioapi_0.13 curl_4.3 png_0.1-7 geneplotter_1.68.0
[89] tibble_3.0.4 stringi_1.5.3 GenomicFeatures_1.42.1 lattice_0.20-41
[93] Matrix_1.2-18 vctrs_0.3.5 pillar_1.4.7 lifecycle_0.2.0
[97] data.table_1.13.2 bitops_1.0-6 irlba_2.3.3 rtracklayer_1.50.0
[101] R6_2.5.0 latticeExtra_0.6-29 hwriter_1.3.2 ShortRead_1.48.0
[105] KernSmooth_2.23-18 MASS_7.3-53 gtools_3.8.2 assertthat_0.2.1
[109] openssl_1.4.3 Category_2.56.0 rjson_0.2.20 withr_2.3.0
[113] GenomicAlignments_1.26.0 batchtools_0.9.14 Rsamtools_2.6.0 GenomeInfoDbData_1.2.4
[117] hms_0.5.3 grid_4.0.3 DOT_0.1 coda_0.19-4
[121] GreyListChIP_1.22.0 ashr_2.2-47 mixsqp_0.3-43 bbmle_1.0.23.1
[125] numDeriv_2016.8-1.1

ADD REPLY •
0
Entering edit mode

The main problem is that you are forming a consensus from two replicates where you are requiring the peaks to overlap in both replicates. As one replicate has no peaks, the consensus will be empty. There are some issues here with catching errors and giving better messages, but you will still end up with zero peaks in one of the consensus sets.

ADD REPLY •
0
Entering edit mode

If the zero peaks is eventually what they can produce, I will reconsider if I should generate a Venn diagram about these. Thanks!

ADD REPLY •
0
Entering edit mode

I'm checking in a version that will give a warning when there are no consensus peaks and skip generating it. It will be available in the next day or two as DiffBind_3.0.13.

It looks like you only have two replicates of each condition, and one of them generated zero peaks. Do you have any idea why you didn't get any peaks for this sample? It looks like it has a similar FrIP to the other replicate.

In this case, you can either include all the peaks from the one "good" replicate, or perhaps include the peaks in that replicate that also overlap at least one peak in one of the other conditions consensus peakset.

Here's an example using the example dataset where I've zeroed out one replicate and use a consensus consisting of the union of two consensus sets with one of the samples:

data(tamoxifen_peaks)
tamox <- dba(tamoxifen, mask=!tamoxifen$masks$MCF7)
tamox$peaks[[2]] <- tamox$peaks[[2]][0,]
tamox <- dba(tamox)
tamox

tamox.cons <- dba.peakset(tamox, consensus=DBA_TISSUE, minOverlap=2)
dba.plotVenn(tamox.cons,c(1,7,8))
tamox.cons <- dba(tamox.cons,c(1,7,8), minOverlap=1 )
tamox.cons
consensus.peaks <- dba.peakset(tamox.cons, bRetrieve=TRUE)

tamox.counts <- dba.count(tamox, peaks=consensus.peaks)
ADD REPLY •
0
Entering edit mode

Thank you so much Dr. Stark. The 0-peak shRNA sample represented the same trends as the other replicate but missed the very tight time window which is really hard to control. Another reason may be IgG was not a good background control in this cell death condition. It is reasonable to discard the 0-peak file since the aim is to further shrink the subset of different binding sites between control and shRNA samples.

Thank you for the exemplified code lines. I previously tried sequential dba.peakset() and dba.count() but met "Error: Can't count: some peaksets are not associated with a .bam file". Then I tried bRetrieve=TRUE in dba.peakset(). But it turned out direct Granges form and the following dba.count() gave "Error in dba.count(pKRNMWnoc) : minOverlap can not be greater than the number of peaksets [0]" How can I associate the .bam files with the DBA object after adding/replacing with "consensus" peakset? Thanks!

ADD REPLY •
1
Entering edit mode

Update: After installing the new version of Diffbind, I can smoothly run the example above. And the "associated bam" problem can be fixed by adjusting the work directory in R. Thanks! (PS: Just a note got during generating tamox.counts. 'BiocParallel' did not register default BiocParallelParam: comparison of these types is not implemented Sample: reads/Chr18_BT474_ER_2.bam125 ...)

ADD REPLY •
0
Entering edit mode

Are you on Windows? If so that should explain the warning about BiocParallel. ( no, I see you are on MacOS...)

ADD REPLY •
0
Entering edit mode

Yes, I am on MacOS. Interestingly, the warning about BiocParallel did not happen on my data this time but only on sample data. I already got the Venn plot from my data (before dba.count step, as the example). Thank you Dr. Stark.

And I am still thinking about these questions: 1) Since Venn diagrams are mainly about peak amounts, they are generally done at "occupancy analysis" (before dba.count) but not at "affinity analysis"(after dba.count, dba.normalize and dba.analyze). Am I right? 2)What is the best way to extract the gene symbol lists with loci and scores, from each subset of the Venn diagram?

Thanks!

ADD REPLY •
0
Entering edit mode

Occupancy analysis basically is Venn diagrams :-) However Venns can be useful to compare differentially bound sites as well, for example overlapping the DB sites from two contrasts, or the Gain sites from one contrast with the Loss sites of another. For this you can use report-based DBA objects by setting bDB=TRUE when calling dba.report() (see help page).

If you assign the return value of a call to dba.plotVenn() it will return a list of peaksets with one GRanges peakset for each part of the Venn diagram (three for 2-way, seven for 3-way, fifteen for 4-way). You can also get these directly (without plotting) using the dba.overlap() function. These GRanges objects include the loci and scores.

Once you have these, annotating them can be accomplished using one of the packages developed for this purpose, such as ChIPpeakAnno or ChIPseeker.

ADD REPLY •
0
Entering edit mode

Thank you for the very helpful instruction.

ADD REPLY •

Login before adding your answer.

Similar Posts
Loading Similar Posts
Traffic: 524 users visited in the last hour
Content Search
Users
Tags
Badges
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6