hexbin package 1.1-4
4
0
Entering edit mode
ulas karaoz ▴ 80
@ulas-karaoz-773
Last seen 10.2 years ago
Hi, Did anyone successfully installed the hexbin 1.1-4 at http://www.bioconductor.org/repository/devel/package/Source/hexbin_1.1 -4.tar.gz for some reason, it fails for me. What is the problem with the old version, 1.0.10? thanks. -------------------------------------------- Ulas Karaoz Boston University Ph.D.Student in Bioinformatics zlab.bu.edu
hexbin hexbin • 1.5k views
ADD COMMENT
0
Entering edit mode
Jeff Gentry ★ 3.9k
@jeff-gentry-12
Last seen 10.2 years ago
> for some reason, it fails for me. You'll need to give more details then "for some reason". What specifically happens when you try to install it?
ADD COMMENT
0
Entering edit mode
ulas karaoz ▴ 80
@ulas-karaoz-773
Last seen 10.2 years ago
I run R on MACOSX, and i have tried to install it from source local package file (tarball) that i have downloaded from The only error message i am getting is: > install.from.file() npackage installation failed I am sure that the tarball i have downloaded was complete. I have tried to unzip/untar it and have tried to do it from a local source directory, it failed as well. thanks. On Nov 4, 2004, at 12:56 PM, Robert Gentleman wrote: > On Thu, Nov 04, 2004 at 12:51:20PM -0500, ulas karaoz wrote: >> Hi, >> Did anyone successfully installed the hexbin 1.1-4 at >> >> http://www.bioconductor.org/repository/devel/package/Source/hexbin_1.1 >> -4.tar.gz >> >> for some reason, it fails for me. > > In which of the several million different possible ways? It would > help if you 1) read the posting guide and 2) provided a proper bug > report. > > >> What is the problem with the old version, 1.0.10? >> thanks. >> >> -------------------------------------------- >> Ulas Karaoz >> Boston University >> Ph.D.Student in Bioinformatics >> zlab.bu.edu >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor@stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor > > -- > +------------------------------------------------------------------- --- > -----+ > | Robert Gentleman phone : (617) 632-5250 > | > | Associate Professor fax: (617) 632-2444 > | > | Department of Biostatistics office: M1B20 > | > | Harvard School of Public Health email: rgentlem@jimmy.harvard.edu > | > +------------------------------------------------------------------- --- > -----+ > -------------------------------------------- Ulas Karaoz Boston University Ph.D.Student in Bioinformatics zlab.bu.edu
ADD COMMENT
0
Entering edit mode
@nicholas-lewin-koh-63
Last seen 10.2 years ago
Hi Can you try on the command line in your unix shell % R CMD INSTALL hexbin_1.1-4.tar.gz And let us know what the error messages are? I need to know if it is a fortran problem, R code , examples documentation, ..... There are a gizillion reasons why it could fail without more to go on it is hard to help. Nicholas >ulas wrote: I run R on MACOSX, and i have tried to install it from source local package file (tarball) that i have downloaded from The only error message i am getting is: > install.from.file() npackage installation failed I am sure that the tarball i have downloaded was complete. I have tried to unzip/untar it and have tried to do it from a local source directory, it failed as well. thanks. On Nov 4, 2004, at 12:56 PM, Robert Gentleman wrote: > On Thu, Nov 04, 2004 at 12:51:20PM -0500, ulas karaoz wrote: >> Hi, >> Did anyone successfully installed the hexbin 1.1-4 at >> >> http://www.bioconductor.org/repository/devel/package/Source/hexbin_1.1 >> -4.tar.gz >> >> for some reason, it fails for me. > > In which of the several million different possible ways? It would > help if you 1) read the posting guide and 2) provided a proper bug > report. > > >> What is the problem with the old version, 1.0.10? >> thanks. >> >> -------------------------------------------- >> Ulas Karaoz >> Boston University >> Ph.D.Student in Bioinformatics >> zlab.bu.edu >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor@stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor > > -- > +--------------------------------------------------------------------- - > -----+ > | Robert Gentleman phone : (617) 632-5250 > | > | Associate Professor fax: (617) 632-2444 > | > | Department of Biostatistics office: M1B20 > | > | Harvard School of Public Health email: rgentlem@jimmy.harvard.edu > | > +--------------------------------------------------------------------- - > -----+ > -------------------------------------------- Ulas Karaoz Boston University Ph.D.Student in Bioinformatics zlab.bu.edu
ADD COMMENT
0
Entering edit mode
@nicholas-lewin-koh-63
Last seen 10.2 years ago
Hi, It looks like the fortran libraries are not being found or there is a problem with your gcc install. The error message is telling you when the shared library is being built the linker can't find the necessary libraries. I don't work on a mac so I won't be too much help, But it does not look like the problem is hexbin. Nicholas On Fri, 5 Nov 2004 10:35:35 -0500, "ulas karaoz" <ulask@bu.edu> said: > Hi, > The problem seems to be specific to MAC OS 10. > I tried to install it on command line in Unix, no problem. > In MACOS 10.3.5, trying to install it on command line gave me the > following error: > > :~/Desktop ul$ R CMD INSTALL hexbin_1.1-4.tar.gz > * Installing *source* package 'hexbin' ... > ** libs > g77 -fno-common -g -O2 -c hbin.f -o hbin.o > g77 -fno-common -g -O2 -c hcell.f -o hcell.o > g77 -fno-common -g -O2 -c herode.f -o herode.o > g77 -fno-common -g -O2 -c hsm.f -o hsm.o > gcc -bundle -flat_namespace -undefined suppress -L/usr/local/lib -o > hexbin.so hbin.o hcell.o herode.o hsm.o -L/usr/local/lib > -L/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4 > -L/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4/../../.. -lfrtbegin > -lg2c -lSystem -lcc_dynamic -framework R > ld: warning -L: directory name > (/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4) does not exist > ld: warning -L: directory name > (/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4/../../..) does not > exist > ld: can't locate file for: -lfrtbegin > make: *** [hexbin.so] Error 1 > ERROR: compilation failed for package 'hexbin' > ** Removing > '/Library/Frameworks/R.framework/Versions/1.9.1/Resources/library/ > hexbin' > > > > On Nov 5, 2004, at 9:06 AM, Nicholas Lewin-Koh wrote: > > > Hi > > Can you try on the command line in your unix shell > > % R CMD INSTALL hexbin_1.1-4.tar.gz > > > > And let us know what the error messages are? I need to know if it is a > > fortran problem, R code , examples documentation, ..... > > There are a gizillion reasons why it could fail without more to go on > > it > > is hard to help. > > > > Nicholas > > > > > >> ulas wrote: > > I run R on MACOSX, and i have tried to install it from source local > > package file (tarball) that i have downloaded from > > > > The only error message i am getting is: > >> install.from.file() > > npackage installation failed > > > > I am sure that the tarball i have downloaded was complete. > > I have tried to unzip/untar it and have tried to do it from a local > > source directory, it failed as well. > > thanks. > > > > On Nov 4, 2004, at 12:56 PM, Robert Gentleman wrote: > > > >> On Thu, Nov 04, 2004 at 12:51:20PM -0500, ulas karaoz wrote: > >>> Hi, > >>> Did anyone successfully installed the hexbin 1.1-4 at > >>> > >>> > > http://www.bioconductor.org/repository/devel/package/Source/hexbin_1.1 > >>> -4.tar.gz > >>> > >>> for some reason, it fails for me. > >> > >> In which of the several million different possible ways? It would > >> help if you 1) read the posting guide and 2) provided a proper bug > >> report. > >> > >> > >>> What is the problem with the old version, 1.0.10? > >>> thanks. > >>> > >>> -------------------------------------------- > >>> Ulas Karaoz > >>> Boston University > >>> Ph.D.Student in Bioinformatics > >>> zlab.bu.edu > >>> > >>> _______________________________________________ > >>> Bioconductor mailing list > >>> Bioconductor@stat.math.ethz.ch > >>> https://stat.ethz.ch/mailman/listinfo/bioconductor > >> > >> -- > >> > > +----------------------------------------------------------------- ----- > >> -----+ > >> | Robert Gentleman phone : (617) > > 632-5250 > >> | > >> | Associate Professor fax: (617) > > 632-2444 > >> | > >> | Department of Biostatistics office: > > M1B20 > >> | > >> | Harvard School of Public Health email: > > rgentlem@jimmy.harvard.edu > >> | > >> > > +----------------------------------------------------------------- ----- > >> -----+ > >> > > -------------------------------------------- > > Ulas Karaoz > > Boston University > > Ph.D.Student in Bioinformatics > > zlab.bu.edu > > > > > > > -------------------------------------------- > Ulas Karaoz > Boston University > Ph.D.Student in Bioinformatics > zlab.bu.edu >
ADD COMMENT
0
Entering edit mode
Wrong version of g77---you probably have the fink version (which does not work properly). The version you need is at hpc.sourceforge.net, please check the R Mac OS X FAQ for further information. On Nov 5, 2004, at 7:31 PM, Nicholas Lewin-Koh wrote: > Hi, > It looks like the fortran libraries are not being found or there is a > problem with your > gcc install. The error message is telling you when the shared library > is > being built > the linker can't find the necessary libraries. I don't work on a mac > so I won't be too much help, But it does not look like the problem is > hexbin. > > Nicholas > > > On Fri, 5 Nov 2004 10:35:35 -0500, "ulas karaoz" <ulask@bu.edu> said: >> Hi, >> The problem seems to be specific to MAC OS 10. >> I tried to install it on command line in Unix, no problem. >> In MACOS 10.3.5, trying to install it on command line gave me the >> following error: >> >> :~/Desktop ul$ R CMD INSTALL hexbin_1.1-4.tar.gz >> * Installing *source* package 'hexbin' ... >> ** libs >> g77 -fno-common -g -O2 -c hbin.f -o hbin.o >> g77 -fno-common -g -O2 -c hcell.f -o hcell.o >> g77 -fno-common -g -O2 -c herode.f -o herode.o >> g77 -fno-common -g -O2 -c hsm.f -o hsm.o >> gcc -bundle -flat_namespace -undefined suppress -L/usr/local/lib -o >> hexbin.so hbin.o hcell.o herode.o hsm.o -L/usr/local/lib >> -L/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4 >> -L/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4/../../.. -lfrtbegin >> -lg2c -lSystem -lcc_dynamic -framework R >> ld: warning -L: directory name >> (/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4) does not exist >> ld: warning -L: directory name >> (/usr/local/lib/gcc/powerpc-apple-darwin6.6/3.4/../../..) does not >> exist >> ld: can't locate file for: -lfrtbegin >> make: *** [hexbin.so] Error 1 >> ERROR: compilation failed for package 'hexbin' >> ** Removing >> '/Library/Frameworks/R.framework/Versions/1.9.1/Resources/library/ >> hexbin' >> >> >> >> On Nov 5, 2004, at 9:06 AM, Nicholas Lewin-Koh wrote: >> >>> Hi >>> Can you try on the command line in your unix shell >>> % R CMD INSTALL hexbin_1.1-4.tar.gz >>> >>> And let us know what the error messages are? I need to know if it is >>> a >>> fortran problem, R code , examples documentation, ..... >>> There are a gizillion reasons why it could fail without more to go on >>> it >>> is hard to help. >>> >>> Nicholas >>> >>> >>>> ulas wrote: >>> I run R on MACOSX, and i have tried to install it from source local >>> package file (tarball) that i have downloaded from >>> >>> The only error message i am getting is: >>>> install.from.file() >>> npackage installation failed >>> >>> I am sure that the tarball i have downloaded was complete. >>> I have tried to unzip/untar it and have tried to do it from a local >>> source directory, it failed as well. >>> thanks. >>> >>> On Nov 4, 2004, at 12:56 PM, Robert Gentleman wrote: >>> >>>> On Thu, Nov 04, 2004 at 12:51:20PM -0500, ulas karaoz wrote: >>>>> Hi, >>>>> Did anyone successfully installed the hexbin 1.1-4 at >>>>> >>>>> >>> http://www.bioconductor.org/repository/devel/package/Source/ >>> hexbin_1.1 >>>>> -4.tar.gz >>>>> >>>>> for some reason, it fails for me. >>>> >>>> In which of the several million different possible ways? It would >>>> help if you 1) read the posting guide and 2) provided a proper bug >>>> report. >>>> >>>> >>>>> What is the problem with the old version, 1.0.10? >>>>> thanks. >>>>> >>>>> -------------------------------------------- >>>>> Ulas Karaoz >>>>> Boston University >>>>> Ph.D.Student in Bioinformatics >>>>> zlab.bu.edu >>>>> >>>>> _______________________________________________ >>>>> Bioconductor mailing list >>>>> Bioconductor@stat.math.ethz.ch >>>>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>>> >>>> -- >>>> >>> +-------------------------------------------------------------------- >>> -- >>>> -----+ >>>> | Robert Gentleman phone : (617) >>> 632-5250 >>>> | >>>> | Associate Professor fax: (617) >>> 632-2444 >>>> | >>>> | Department of Biostatistics office: >>> M1B20 >>>> | >>>> | Harvard School of Public Health email: >>> rgentlem@jimmy.harvard.edu >>>> | >>>> >>> +-------------------------------------------------------------------- >>> -- >>>> -----+ >>>> >>> -------------------------------------------- >>> Ulas Karaoz >>> Boston University >>> Ph.D.Student in Bioinformatics >>> zlab.bu.edu >>> >>> >>> >> -------------------------------------------- >> Ulas Karaoz >> Boston University >> Ph.D.Student in Bioinformatics >> zlab.bu.edu >> > > _______________________________________________ > Bioconductor mailing list > Bioconductor@stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > --- Byron Ellis (ellis@stat.harvard.edu) "Oook" -- The Librarian
ADD REPLY

Login before adding your answer.

Traffic: 480 users visited in the last hour
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6