BSgenome.Dmelanogaster.UCSC.dm3 in R 3.0
1
0
Entering edit mode
Guest User ★ 13k
@guest-user-4897
Last seen 10.2 years ago
I am trying to get myself more familiar with Bioconductor, so I have been walking through the vignette of the 2013 Intermediate R/Bioconductor for Sequence Analysis course offered earlier this month (February 2013). (Link to course page and vignette: http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). I have installed R 3.0 and Bioconductor 2.12 as per the instructions in the vignette. I now have two problems: The first seems relatively minor: I cannot seem to get RStudio to open R 3.0. I simply get a message that says that "The R session had a fatal error." I can open R using its own GUI, but it would be nice to work within RStudio. The second is a bit more problematic. I have been able to follow the vignette without too many problems up until Chapter 5 "Strings and Reads". The exercise has you load the BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the package using the provided link to the development version of the Drosophila genome (http://bioconductor.org/packages/devel/data/annotat ion/html/BSgenome.Dmelanogaster.UCSC.dm3.html) and by entering the following code: >source("http://bioconductor.org/biocLite.R") >biocLite("BSgenome.Dmelanogaster.UCSC.dm3") However, when I try to load the library, I get the following: > library(BSgenome.Dmelanogaster.UCSC.dm3) Error: package ???BSgenome.Dmelanogaster.UCSC.dm3??? was built before R 3.0.0: please re-install it The library installs on earlier releases of R, but I cannot convince it to run on R 3.0 where I can make use of the current vignette. Any advice on either of these two issues, but particularly the second, would be greatly appreciated. Sean -- output of sessionInfo(): > sessionInfo() R Under development (unstable) (2013-02-21 r62017) Platform: x86_64-w64-mingw32/x64 (64-bit) locale: [1] LC_COLLATE=English_United States.1252 [2] LC_CTYPE=English_United States.1252 [3] LC_MONETARY=English_United States.1252 [4] LC_NUMERIC=C [5] LC_TIME=English_United States.1252 attached base packages: [1] parallel stats graphics grDevices utils datasets methods [8] base other attached packages: [1] Biostrings_2.27.11 [2] IntermediateSequenceAnalysis2013_0.1.1 [3] SequenceAnalysisData_0.1.4 [4] edgeR_3.1.4 [5] limma_3.15.14 [6] GenomicFeatures_1.11.11 [7] AnnotationDbi_1.21.10 [8] Biobase_2.19.2 [9] GenomicRanges_1.11.30 [10] IRanges_1.17.35 [11] BiocGenerics_0.5.6 loaded via a namespace (and not attached): [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 rtracklayer_1.19.9 [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 zlibbioc_1.5.0 > -- Sent via the guest posting facility at bioconductor.org.
GUI GUI • 1.6k views
ADD COMMENT •
0
Entering edit mode
Dan Tenenbaum ★ 8.2k
@dan-tenenbaum-4256
Last seen 5 months ago
United States
Hi Sean, On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest at="" bioconductor.org=""> wrote: > > I am trying to get myself more familiar with Bioconductor, so I have been walking through the vignette of the 2013 Intermediate R/Bioconductor for Sequence Analysis course offered earlier this month (February 2013). (Link to course page and vignette: http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). > > I have installed R 3.0 and Bioconductor 2.12 as per the instructions in the vignette. I now have two problems: > > The first seems relatively minor: I cannot seem to get RStudio to open R 3.0. I simply get a message that says that "The R session had a fatal error." I can open R using its own GUI, but it would be nice to work within RStudio. > > The second is a bit more problematic. I have been able to follow the vignette without too many problems up until > Chapter 5 "Strings and Reads". The exercise has you load the BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the package using the provided link to the development version of the Drosophila genome (http://bioconductor.org/packages/devel/data/annotat ion/html/BSgenome.Dmelanogaster.UCSC.dm3.html) and by entering the following code: > >>source("http://bioconductor.org/biocLite.R") >>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") > > However, when I try to load the library, I get the following: > >> library(BSgenome.Dmelanogaster.UCSC.dm3) > Error: package ???BSgenome.Dmelanogaster.UCSC.dm3??? was built before R 3.0.0: please re-install it > > The library installs on earlier releases of R, but I cannot convince it to run on R 3.0 where I can make use of the current vignette. > > Any advice on either of these two issues, but particularly the second, would be greatly appreciated. > Try this: biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") As for RStudio, I'm not sure, what is your OS and output of sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that the first R in your path is R-devel. Dan > Sean > > -- output of sessionInfo(): > >> sessionInfo() > R Under development (unstable) (2013-02-21 r62017) > Platform: x86_64-w64-mingw32/x64 (64-bit) > > locale: > [1] LC_COLLATE=English_United States.1252 > [2] LC_CTYPE=English_United States.1252 > [3] LC_MONETARY=English_United States.1252 > [4] LC_NUMERIC=C > [5] LC_TIME=English_United States.1252 > > attached base packages: > [1] parallel stats graphics grDevices utils datasets methods > [8] base > > other attached packages: > [1] Biostrings_2.27.11 > [2] IntermediateSequenceAnalysis2013_0.1.1 > [3] SequenceAnalysisData_0.1.4 > [4] edgeR_3.1.4 > [5] limma_3.15.14 > [6] GenomicFeatures_1.11.11 > [7] AnnotationDbi_1.21.10 > [8] Biobase_2.19.2 > [9] GenomicRanges_1.11.30 > [10] IRanges_1.17.35 > [11] BiocGenerics_0.5.6 > > loaded via a namespace (and not attached): > [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 > [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 rtracklayer_1.19.9 > [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 zlibbioc_1.5.0 >> > > -- > Sent via the guest posting facility at bioconductor.org. > > _______________________________________________ > Bioconductor mailing list > Bioconductor at r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD COMMENT •
0
Entering edit mode
Hi Dan, Was the bug you reported regarding recent Rstudio-server and R-devel (3.0) builds resolved? thanks, --t On Thu, Feb 28, 2013 at 1:45 PM, Dan Tenenbaum <dtenenba@fhcrc.org> wrote: > Hi Sean, > > > On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest@bioconductor.org> > wrote: > > > > I am trying to get myself more familiar with Bioconductor, so I have > been walking through the vignette of the 2013 Intermediate R/Bioconductor > for Sequence Analysis course offered earlier this month (February 2013). > (Link to course page and vignette: > http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). > > > > I have installed R 3.0 and Bioconductor 2.12 as per the instructions in > the vignette. I now have two problems: > > > > The first seems relatively minor: I cannot seem to get RStudio to open R > 3.0. I simply get a message that says that "The R session had a fatal > error." I can open R using its own GUI, but it would be nice to work within > RStudio. > > > > The second is a bit more problematic. I have been able to follow the > vignette without too many problems up until > > Chapter 5 "Strings and Reads". The exercise has you load the > BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the > package using the provided link to the development version of the > Drosophila genome ( > http://bioconductor.org/packages/devel/data/annotation/html/BSgenome .Dmelanogaster.UCSC.dm3.html) > and by entering the following code: > > > >>source("http://bioconductor.org/biocLite.R") > >>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") > > > > However, when I try to load the library, I get the following: > > > >> library(BSgenome.Dmelanogaster.UCSC.dm3) > > Error: package ‘BSgenome.Dmelanogaster.UCSC.dm3’ was built before R > 3.0.0: please re-install it > > > > The library installs on earlier releases of R, but I cannot convince it > to run on R 3.0 where I can make use of the current vignette. > > > > Any advice on either of these two issues, but particularly the second, > would be greatly appreciated. > > > > Try this: > biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") > > As for RStudio, I'm not sure, what is your OS and output of > sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that > the first R in your path is R-devel. > > Dan > > > > Sean > > > > -- output of sessionInfo(): > > > >> sessionInfo() > > R Under development (unstable) (2013-02-21 r62017) > > Platform: x86_64-w64-mingw32/x64 (64-bit) > > > > locale: > > [1] LC_COLLATE=English_United States.1252 > > [2] LC_CTYPE=English_United States.1252 > > [3] LC_MONETARY=English_United States.1252 > > [4] LC_NUMERIC=C > > [5] LC_TIME=English_United States.1252 > > > > attached base packages: > > [1] parallel stats graphics grDevices utils datasets methods > > [8] base > > > > other attached packages: > > [1] Biostrings_2.27.11 > > [2] IntermediateSequenceAnalysis2013_0.1.1 > > [3] SequenceAnalysisData_0.1.4 > > [4] edgeR_3.1.4 > > [5] limma_3.15.14 > > [6] GenomicFeatures_1.11.11 > > [7] AnnotationDbi_1.21.10 > > [8] Biobase_2.19.2 > > [9] GenomicRanges_1.11.30 > > [10] IRanges_1.17.35 > > [11] BiocGenerics_0.5.6 > > > > loaded via a namespace (and not attached): > > [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 > > [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 > rtracklayer_1.19.9 > > [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 > zlibbioc_1.5.0 > >> > > > > -- > > Sent via the guest posting facility at bioconductor.org. > > > > _______________________________________________ > > Bioconductor mailing list > > Bioconductor@r-project.org > > https://stat.ethz.ch/mailman/listinfo/bioconductor > > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > > _______________________________________________ > Bioconductor mailing list > Bioconductor@r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > -- *A model is a lie that helps you see the truth.* * * Howard Skipper<http: cancerres.aacrjournals.org="" content="" 31="" 9="" 1173.full.pdf=""> [[alternative HTML version deleted]]
ADD REPLY •
0
Entering edit mode
On Thu, Feb 28, 2013 at 1:54 PM, Tim Triche, Jr. <tim.triche at="" gmail.com=""> wrote: > Hi Dan, > > Was the bug you reported regarding recent Rstudio-server and R-devel (3.0) > builds resolved? > Not yet as far as I know, I hope to see an update here soon: http://support.rstudio.org/help/discussions/problems/4946-rstudio- server-broken-with-recent-r-devel Dan > thanks, > > --t > > > > On Thu, Feb 28, 2013 at 1:45 PM, Dan Tenenbaum <dtenenba at="" fhcrc.org=""> wrote: >> >> Hi Sean, >> >> >> On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest at="" bioconductor.org=""> >> wrote: >> > >> > I am trying to get myself more familiar with Bioconductor, so I have >> > been walking through the vignette of the 2013 Intermediate R/Bioconductor >> > for Sequence Analysis course offered earlier this month (February 2013). >> > (Link to course page and vignette: >> > http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). >> > >> > I have installed R 3.0 and Bioconductor 2.12 as per the instructions in >> > the vignette. I now have two problems: >> > >> > The first seems relatively minor: I cannot seem to get RStudio to open R >> > 3.0. I simply get a message that says that "The R session had a fatal >> > error." I can open R using its own GUI, but it would be nice to work within >> > RStudio. >> > >> > The second is a bit more problematic. I have been able to follow the >> > vignette without too many problems up until >> > Chapter 5 "Strings and Reads". The exercise has you load the >> > BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the >> > package using the provided link to the development version of the Drosophila >> > genome >> > (http://bioconductor.org/packages/devel/data/annotation/html/BSge nome.Dmelanogaster.UCSC.dm3.html) >> > and by entering the following code: >> > >> >>source("http://bioconductor.org/biocLite.R") >> >>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") >> > >> > However, when I try to load the library, I get the following: >> > >> >> library(BSgenome.Dmelanogaster.UCSC.dm3) >> > Error: package ???BSgenome.Dmelanogaster.UCSC.dm3??? was built before R >> > 3.0.0: please re-install it >> > >> > The library installs on earlier releases of R, but I cannot convince it >> > to run on R 3.0 where I can make use of the current vignette. >> > >> > Any advice on either of these two issues, but particularly the second, >> > would be greatly appreciated. >> > >> >> Try this: >> biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") >> >> As for RStudio, I'm not sure, what is your OS and output of >> sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that >> the first R in your path is R-devel. >> >> Dan >> >> >> > Sean >> > >> > -- output of sessionInfo(): >> > >> >> sessionInfo() >> > R Under development (unstable) (2013-02-21 r62017) >> > Platform: x86_64-w64-mingw32/x64 (64-bit) >> > >> > locale: >> > [1] LC_COLLATE=English_United States.1252 >> > [2] LC_CTYPE=English_United States.1252 >> > [3] LC_MONETARY=English_United States.1252 >> > [4] LC_NUMERIC=C >> > [5] LC_TIME=English_United States.1252 >> > >> > attached base packages: >> > [1] parallel stats graphics grDevices utils datasets methods >> > [8] base >> > >> > other attached packages: >> > [1] Biostrings_2.27.11 >> > [2] IntermediateSequenceAnalysis2013_0.1.1 >> > [3] SequenceAnalysisData_0.1.4 >> > [4] edgeR_3.1.4 >> > [5] limma_3.15.14 >> > [6] GenomicFeatures_1.11.11 >> > [7] AnnotationDbi_1.21.10 >> > [8] Biobase_2.19.2 >> > [9] GenomicRanges_1.11.30 >> > [10] IRanges_1.17.35 >> > [11] BiocGenerics_0.5.6 >> > >> > loaded via a namespace (and not attached): >> > [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 >> > [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 >> > rtracklayer_1.19.9 >> > [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 >> > zlibbioc_1.5.0 >> >> >> > >> > -- >> > Sent via the guest posting facility at bioconductor.org. >> > >> > _______________________________________________ >> > Bioconductor mailing list >> > Bioconductor at r-project.org >> > https://stat.ethz.ch/mailman/listinfo/bioconductor >> > Search the archives: >> > http://news.gmane.org/gmane.science.biology.informatics.conductor >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at r-project.org >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor > > > > > -- > A model is a lie that helps you see the truth. > > Howard Skipper
ADD REPLY •
0
Entering edit mode
Yeah I just tried it and no dice. At one point I looked into patching R-devel so that this wouldn't be such an issue but the scope of the extern/extern0 declarations foiled me. Plus Prof Ripley probably would not have accepted the patch anyways, as it's more of an Rstudio issue really thanks! --t On Thu, Feb 28, 2013 at 1:56 PM, Dan Tenenbaum <dtenenba@fhcrc.org> wrote: > On Thu, Feb 28, 2013 at 1:54 PM, Tim Triche, Jr. <tim.triche@gmail.com> > wrote: > > Hi Dan, > > > > Was the bug you reported regarding recent Rstudio-server and R-devel > (3.0) > > builds resolved? > > > > Not yet as far as I know, I hope to see an update here soon: > > > http://support.rstudio.org/help/discussions/problems/4946-rstudio- server-broken-with-recent-r-devel > > Dan > > > > thanks, > > > > --t > > > > > > > > On Thu, Feb 28, 2013 at 1:45 PM, Dan Tenenbaum <dtenenba@fhcrc.org> > wrote: > >> > >> Hi Sean, > >> > >> > >> On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest@bioconductor.org> > >> wrote: > >> > > >> > I am trying to get myself more familiar with Bioconductor, so I have > >> > been walking through the vignette of the 2013 Intermediate > R/Bioconductor > >> > for Sequence Analysis course offered earlier this month (February > 2013). > >> > (Link to course page and vignette: > >> > > http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). > >> > > >> > I have installed R 3.0 and Bioconductor 2.12 as per the instructions > in > >> > the vignette. I now have two problems: > >> > > >> > The first seems relatively minor: I cannot seem to get RStudio to > open R > >> > 3.0. I simply get a message that says that "The R session had a fatal > >> > error." I can open R using its own GUI, but it would be nice to work > within > >> > RStudio. > >> > > >> > The second is a bit more problematic. I have been able to follow the > >> > vignette without too many problems up until > >> > Chapter 5 "Strings and Reads". The exercise has you load the > >> > BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download > the > >> > package using the provided link to the development version of the > Drosophila > >> > genome > >> > ( > http://bioconductor.org/packages/devel/data/annotation/html/BSgenome .Dmelanogaster.UCSC.dm3.html > ) > >> > and by entering the following code: > >> > > >> >>source("http://bioconductor.org/biocLite.R") > >> >>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") > >> > > >> > However, when I try to load the library, I get the following: > >> > > >> >> library(BSgenome.Dmelanogaster.UCSC.dm3) > >> > Error: package ‘BSgenome.Dmelanogaster.UCSC.dm3’ was built before > R > >> > 3.0.0: please re-install it > >> > > >> > The library installs on earlier releases of R, but I cannot convince > it > >> > to run on R 3.0 where I can make use of the current vignette. > >> > > >> > Any advice on either of these two issues, but particularly the second, > >> > would be greatly appreciated. > >> > > >> > >> Try this: > >> biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") > >> > >> As for RStudio, I'm not sure, what is your OS and output of > >> sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that > >> the first R in your path is R-devel. > >> > >> Dan > >> > >> > >> > Sean > >> > > >> > -- output of sessionInfo(): > >> > > >> >> sessionInfo() > >> > R Under development (unstable) (2013-02-21 r62017) > >> > Platform: x86_64-w64-mingw32/x64 (64-bit) > >> > > >> > locale: > >> > [1] LC_COLLATE=English_United States.1252 > >> > [2] LC_CTYPE=English_United States.1252 > >> > [3] LC_MONETARY=English_United States.1252 > >> > [4] LC_NUMERIC=C > >> > [5] LC_TIME=English_United States.1252 > >> > > >> > attached base packages: > >> > [1] parallel stats graphics grDevices utils datasets > methods > >> > [8] base > >> > > >> > other attached packages: > >> > [1] Biostrings_2.27.11 > >> > [2] IntermediateSequenceAnalysis2013_0.1.1 > >> > [3] SequenceAnalysisData_0.1.4 > >> > [4] edgeR_3.1.4 > >> > [5] limma_3.15.14 > >> > [6] GenomicFeatures_1.11.11 > >> > [7] AnnotationDbi_1.21.10 > >> > [8] Biobase_2.19.2 > >> > [9] GenomicRanges_1.11.30 > >> > [10] IRanges_1.17.35 > >> > [11] BiocGenerics_0.5.6 > >> > > >> > loaded via a namespace (and not attached): > >> > [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 > DBI_0.2-5 > >> > [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 > >> > rtracklayer_1.19.9 > >> > [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 > >> > zlibbioc_1.5.0 > >> >> > >> > > >> > -- > >> > Sent via the guest posting facility at bioconductor.org. > >> > > >> > _______________________________________________ > >> > Bioconductor mailing list > >> > Bioconductor@r-project.org > >> > https://stat.ethz.ch/mailman/listinfo/bioconductor > >> > Search the archives: > >> > http://news.gmane.org/gmane.science.biology.informatics.conductor > >> > >> _______________________________________________ > >> Bioconductor mailing list > >> Bioconductor@r-project.org > >> https://stat.ethz.ch/mailman/listinfo/bioconductor > >> Search the archives: > >> http://news.gmane.org/gmane.science.biology.informatics.conductor > > > > > > > > > > -- > > A model is a lie that helps you see the truth. > > > > Howard Skipper > -- *A model is a lie that helps you see the truth.* * * Howard Skipper<http: cancerres.aacrjournals.org="" content="" 31="" 9="" 1173.full.pdf=""> [[alternative HTML version deleted]]
ADD REPLY •
0
Entering edit mode
Hi Dan, Thanks for the biocLite tip, that seems to have gotten me past that particular hurdle. For the RStudio issue, I am running Windows 7, 64-bit. I will append my sessionInfo() again at the end. I had a previous version of R on this machine, 2.15.1. I tried installing the R-devel in parallel, but when that wasn't working I uninstalled it. Now I just have the R-devel version. To open RStudio, I have tried holding down the Ctrl key while opening. Here I have the option of selecting the 32-bit or the 64-bit version of R-devel. I have tried both with the same result, i.e. fatal error. Is there a way of checking to see if there is still some part of the previous version that is getting in the way? Thanks Sean > sessionInfo() R Under development (unstable) (2013-02-21 r62017) Platform: x86_64-w64-mingw32/x64 (64-bit) locale: [1] LC_COLLATE=English_United States.1252 LC_CTYPE=English_United States.1252 [3] LC_MONETARY=English_United States.1252 LC_NUMERIC=C [5] LC_TIME=English_United States.1252 attached base packages: [1] parallel stats graphics grDevices utils datasets methods base other attached packages: [1] BSgenome.Dmelanogaster.UCSC.dm3_1.3.19 BSgenome_1.27.1 [3] BiocInstaller_1.9.6 Biostrings_2.27.11 [5] IntermediateSequenceAnalysis2013_0.1.1 SequenceAnalysisData_0.1.4 [7] edgeR_3.1.4 limma_3.15.14 [9] GenomicFeatures_1.11.11 AnnotationDbi_1.21.10 [11] Biobase_2.19.2 GenomicRanges_1.11.30 [13] IRanges_1.17.35 BiocGenerics_0.5.6 loaded via a namespace (and not attached): Error in x[["Version"]] : subscript out of bounds In addition: Warning message: In FUN(c("biomaRt", "bitops", "DBI", "RCurl", "Rsamtools", "RSQLite", : DESCRIPTION file of package 'Rsamtools' is missing or broken > -----Original Message----- From: Dan Tenenbaum [mailto:dtenenba@fhcrc.org] Sent: Thursday, February 28, 2013 1:46 PM To: Sean [guest] Cc: bioconductor at r-project.org; Taylor, Sean D Subject: Re: [BioC] BSgenome.Dmelanogaster.UCSC.dm3 in R 3.0 Hi Sean, On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest at="" bioconductor.org=""> wrote: > > I am trying to get myself more familiar with Bioconductor, so I have been walking through the vignette of the 2013 Intermediate R/Bioconductor for Sequence Analysis course offered earlier this month (February 2013). (Link to course page and vignette: http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). > > I have installed R 3.0 and Bioconductor 2.12 as per the instructions in the vignette. I now have two problems: > > The first seems relatively minor: I cannot seem to get RStudio to open R 3.0. I simply get a message that says that "The R session had a fatal error." I can open R using its own GUI, but it would be nice to work within RStudio. > > The second is a bit more problematic. I have been able to follow the > vignette without too many problems up until Chapter 5 "Strings and Reads". The exercise has you load the BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the package using the provided link to the development version of the Drosophila genome (http://bioco nductor.org/packages/devel/data/annotation/html/BSgenome.Dmelanogaster .UCSC.dm3.html) and by entering the following code: > >>source("http://bioconductor.org/biocLite.R") >>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") > > However, when I try to load the library, I get the following: > >> library(BSgenome.Dmelanogaster.UCSC.dm3) > Error: package ???BSgenome.Dmelanogaster.UCSC.dm3??? was built before > R 3.0.0: please re-install it > > The library installs on earlier releases of R, but I cannot convince it to run on R 3.0 where I can make use of the current vignette. > > Any advice on either of these two issues, but particularly the second, would be greatly appreciated. > Try this: biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") As for RStudio, I'm not sure, what is your OS and output of sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that the first R in your path is R-devel. Dan > Sean > > -- output of sessionInfo(): > >> sessionInfo() > R Under development (unstable) (2013-02-21 r62017) > Platform: x86_64-w64-mingw32/x64 (64-bit) > > locale: > [1] LC_COLLATE=English_United States.1252 [2] LC_CTYPE=English_United > States.1252 [3] LC_MONETARY=English_United States.1252 [4] > LC_NUMERIC=C [5] LC_TIME=English_United States.1252 > > attached base packages: > [1] parallel stats graphics grDevices utils datasets methods > [8] base > > other attached packages: > [1] Biostrings_2.27.11 > [2] IntermediateSequenceAnalysis2013_0.1.1 > [3] SequenceAnalysisData_0.1.4 > [4] edgeR_3.1.4 > [5] limma_3.15.14 > [6] GenomicFeatures_1.11.11 > [7] AnnotationDbi_1.21.10 > [8] Biobase_2.19.2 > [9] GenomicRanges_1.11.30 > [10] IRanges_1.17.35 > [11] BiocGenerics_0.5.6 > > loaded via a namespace (and not attached): > [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 > [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 rtracklayer_1.19.9 > [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 zlibbioc_1.5.0 >> > > -- > Sent via the guest posting facility at bioconductor.org. > > _______________________________________________ > Bioconductor mailing list > Bioconductor at r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD REPLY •
0
Entering edit mode
On Thu, Feb 28, 2013 at 2:33 PM, Taylor, Sean D <sdtaylor at="" fhcrc.org=""> wrote: > Hi Dan, > > Thanks for the biocLite tip, that seems to have gotten me past that particular hurdle. > > For the RStudio issue, I am running Windows 7, 64-bit. I will append my sessionInfo() again at the end. I had a previous version of R on this machine, 2.15.1. I tried installing the R-devel in parallel, but when that wasn't working I uninstalled it. Now I just have the R-devel version. To open RStudio, I have tried holding down the Ctrl key while opening. Here I have the option of selecting the 32-bit or the 64-bit version of R-devel. I have tried both with the same result, i.e. fatal error. Is there a way of checking to see if there is still some part of the previous version that is getting in the way? > At this point I think your best bet is to report the issue on RStudio's forums: http://support.rstudio.org/ > Thanks > Sean > >> sessionInfo() > R Under development (unstable) (2013-02-21 r62017) > Platform: x86_64-w64-mingw32/x64 (64-bit) > > locale: > [1] LC_COLLATE=English_United States.1252 LC_CTYPE=English_United States.1252 > [3] LC_MONETARY=English_United States.1252 LC_NUMERIC=C > [5] LC_TIME=English_United States.1252 > > attached base packages: > [1] parallel stats graphics grDevices utils datasets methods base > > other attached packages: > [1] BSgenome.Dmelanogaster.UCSC.dm3_1.3.19 BSgenome_1.27.1 > [3] BiocInstaller_1.9.6 Biostrings_2.27.11 > [5] IntermediateSequenceAnalysis2013_0.1.1 SequenceAnalysisData_0.1.4 > [7] edgeR_3.1.4 limma_3.15.14 > [9] GenomicFeatures_1.11.11 AnnotationDbi_1.21.10 > [11] Biobase_2.19.2 GenomicRanges_1.11.30 > [13] IRanges_1.17.35 BiocGenerics_0.5.6 > > loaded via a namespace (and not attached): > Error in x[["Version"]] : subscript out of bounds > In addition: Warning message: > In FUN(c("biomaRt", "bitops", "DBI", "RCurl", "Rsamtools", "RSQLite", : > DESCRIPTION file of package 'Rsamtools' is missing or broken >> This is rather strange, though....this should not be happening. I might suggest completely removing your R installation and starting again from scratch, if that is practical. Dan > > > > -----Original Message----- > From: Dan Tenenbaum [mailto:dtenenba at fhcrc.org] > Sent: Thursday, February 28, 2013 1:46 PM > To: Sean [guest] > Cc: bioconductor at r-project.org; Taylor, Sean D > Subject: Re: [BioC] BSgenome.Dmelanogaster.UCSC.dm3 in R 3.0 > > Hi Sean, > > > On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest at="" bioconductor.org=""> wrote: >> >> I am trying to get myself more familiar with Bioconductor, so I have been walking through the vignette of the 2013 Intermediate R/Bioconductor for Sequence Analysis course offered earlier this month (February 2013). (Link to course page and vignette: http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). >> >> I have installed R 3.0 and Bioconductor 2.12 as per the instructions in the vignette. I now have two problems: >> >> The first seems relatively minor: I cannot seem to get RStudio to open R 3.0. I simply get a message that says that "The R session had a fatal error." I can open R using its own GUI, but it would be nice to work within RStudio. >> >> The second is a bit more problematic. I have been able to follow the >> vignette without too many problems up until Chapter 5 "Strings and Reads". The exercise has you load the BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the package using the provided link to the development version of the Drosophila genome (http://bioco nductor.org/packages/devel/data/annotation/html/BSgenome.Dmelanogaster .UCSC.dm3.html) and by entering the following code: >> >>>source("http://bioconductor.org/biocLite.R") >>>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") >> >> However, when I try to load the library, I get the following: >> >>> library(BSgenome.Dmelanogaster.UCSC.dm3) >> Error: package ???BSgenome.Dmelanogaster.UCSC.dm3??? was built before >> R 3.0.0: please re-install it >> >> The library installs on earlier releases of R, but I cannot convince it to run on R 3.0 where I can make use of the current vignette. >> >> Any advice on either of these two issues, but particularly the second, would be greatly appreciated. >> > > Try this: > biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") > > As for RStudio, I'm not sure, what is your OS and output of sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that the first R in your path is R-devel. > > Dan > > >> Sean >> >> -- output of sessionInfo(): >> >>> sessionInfo() >> R Under development (unstable) (2013-02-21 r62017) >> Platform: x86_64-w64-mingw32/x64 (64-bit) >> >> locale: >> [1] LC_COLLATE=English_United States.1252 [2] LC_CTYPE=English_United >> States.1252 [3] LC_MONETARY=English_United States.1252 [4] >> LC_NUMERIC=C [5] LC_TIME=English_United States.1252 >> >> attached base packages: >> [1] parallel stats graphics grDevices utils datasets methods >> [8] base >> >> other attached packages: >> [1] Biostrings_2.27.11 >> [2] IntermediateSequenceAnalysis2013_0.1.1 >> [3] SequenceAnalysisData_0.1.4 >> [4] edgeR_3.1.4 >> [5] limma_3.15.14 >> [6] GenomicFeatures_1.11.11 >> [7] AnnotationDbi_1.21.10 >> [8] Biobase_2.19.2 >> [9] GenomicRanges_1.11.30 >> [10] IRanges_1.17.35 >> [11] BiocGenerics_0.5.6 >> >> loaded via a namespace (and not attached): >> [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 >> [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 rtracklayer_1.19.9 >> [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 zlibbioc_1.5.0 >>> >> >> -- >> Sent via the guest posting facility at bioconductor.org. >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at r-project.org >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD REPLY •
0
Entering edit mode
Yes, strange indeed. I just tried uninstalling everything I could think of and reinstalling R 3.0 and RStudio from the RStudio 0.97.318 installer. Still no luck. I will take your other suggestion and post to the RStudio forums. Thanks, Sean -----Original Message----- From: Dan Tenenbaum [mailto:dtenenba@fhcrc.org] Sent: Thursday, February 28, 2013 2:41 PM To: Taylor, Sean D Cc: Sean [guest]; bioconductor at r-project.org Subject: Re: [BioC] BSgenome.Dmelanogaster.UCSC.dm3 in R 3.0 On Thu, Feb 28, 2013 at 2:33 PM, Taylor, Sean D <sdtaylor at="" fhcrc.org=""> wrote: > Hi Dan, > > Thanks for the biocLite tip, that seems to have gotten me past that particular hurdle. > > For the RStudio issue, I am running Windows 7, 64-bit. I will append my sessionInfo() again at the end. I had a previous version of R on this machine, 2.15.1. I tried installing the R-devel in parallel, but when that wasn't working I uninstalled it. Now I just have the R-devel version. To open RStudio, I have tried holding down the Ctrl key while opening. Here I have the option of selecting the 32-bit or the 64-bit version of R-devel. I have tried both with the same result, i.e. fatal error. Is there a way of checking to see if there is still some part of the previous version that is getting in the way? > At this point I think your best bet is to report the issue on RStudio's forums: http://support.rstudio.org/ > Thanks > Sean > >> sessionInfo() > R Under development (unstable) (2013-02-21 r62017) > Platform: x86_64-w64-mingw32/x64 (64-bit) > > locale: > [1] LC_COLLATE=English_United States.1252 LC_CTYPE=English_United > States.1252 [3] LC_MONETARY=English_United States.1252 LC_NUMERIC=C > [5] LC_TIME=English_United States.1252 > > attached base packages: > [1] parallel stats graphics grDevices utils datasets methods base > > other attached packages: > [1] BSgenome.Dmelanogaster.UCSC.dm3_1.3.19 BSgenome_1.27.1 > [3] BiocInstaller_1.9.6 Biostrings_2.27.11 > [5] IntermediateSequenceAnalysis2013_0.1.1 SequenceAnalysisData_0.1.4 > [7] edgeR_3.1.4 limma_3.15.14 > [9] GenomicFeatures_1.11.11 AnnotationDbi_1.21.10 > [11] Biobase_2.19.2 GenomicRanges_1.11.30 > [13] IRanges_1.17.35 BiocGenerics_0.5.6 > > loaded via a namespace (and not attached): > Error in x[["Version"]] : subscript out of bounds In addition: Warning > message: > In FUN(c("biomaRt", "bitops", "DBI", "RCurl", "Rsamtools", "RSQLite", : > DESCRIPTION file of package 'Rsamtools' is missing or broken >> This is rather strange, though....this should not be happening. I might suggest completely removing your R installation and starting again from scratch, if that is practical. Dan > > > > -----Original Message----- > From: Dan Tenenbaum [mailto:dtenenba at fhcrc.org] > Sent: Thursday, February 28, 2013 1:46 PM > To: Sean [guest] > Cc: bioconductor at r-project.org; Taylor, Sean D > Subject: Re: [BioC] BSgenome.Dmelanogaster.UCSC.dm3 in R 3.0 > > Hi Sean, > > > On Thu, Feb 28, 2013 at 1:28 PM, Sean [guest] <guest at="" bioconductor.org=""> wrote: >> >> I am trying to get myself more familiar with Bioconductor, so I have been walking through the vignette of the 2013 Intermediate R/Bioconductor for Sequence Analysis course offered earlier this month (February 2013). (Link to course page and vignette: http://www.bioconductor.org/help/course- materials/2013/SeattleFeb2013/). >> >> I have installed R 3.0 and Bioconductor 2.12 as per the instructions in the vignette. I now have two problems: >> >> The first seems relatively minor: I cannot seem to get RStudio to open R 3.0. I simply get a message that says that "The R session had a fatal error." I can open R using its own GUI, but it would be nice to work within RStudio. >> >> The second is a bit more problematic. I have been able to follow the >> vignette without too many problems up until Chapter 5 "Strings and Reads". The exercise has you load the BSgenome.Dmelanogaster.UCSC.dm3 data package. I am able to download the package using the provided link to the development version of the Drosophila genome (http://bioco nductor.org/packages/devel/data/annotation/html/BSgenome.Dmelanogaster .UCSC.dm3.html) and by entering the following code: >> >>>source("http://bioconductor.org/biocLite.R") >>>biocLite("BSgenome.Dmelanogaster.UCSC.dm3") >> >> However, when I try to load the library, I get the following: >> >>> library(BSgenome.Dmelanogaster.UCSC.dm3) >> Error: package ???BSgenome.Dmelanogaster.UCSC.dm3??? was built before >> R 3.0.0: please re-install it >> >> The library installs on earlier releases of R, but I cannot convince it to run on R 3.0 where I can make use of the current vignette. >> >> Any advice on either of these two issues, but particularly the second, would be greatly appreciated. >> > > Try this: > biocLite("BSgenome.Dmelanogaster.UCSC.dm3", type="source") > > As for RStudio, I'm not sure, what is your OS and output of sessionInfo()? I successfully use RStudio with R-3.0.0. Make sure that the first R in your path is R-devel. > > Dan > > >> Sean >> >> -- output of sessionInfo(): >> >>> sessionInfo() >> R Under development (unstable) (2013-02-21 r62017) >> Platform: x86_64-w64-mingw32/x64 (64-bit) >> >> locale: >> [1] LC_COLLATE=English_United States.1252 [2] LC_CTYPE=English_United >> States.1252 [3] LC_MONETARY=English_United States.1252 [4] >> LC_NUMERIC=C [5] LC_TIME=English_United States.1252 >> >> attached base packages: >> [1] parallel stats graphics grDevices utils datasets methods >> [8] base >> >> other attached packages: >> [1] Biostrings_2.27.11 >> [2] IntermediateSequenceAnalysis2013_0.1.1 >> [3] SequenceAnalysisData_0.1.4 >> [4] edgeR_3.1.4 >> [5] limma_3.15.14 >> [6] GenomicFeatures_1.11.11 >> [7] AnnotationDbi_1.21.10 >> [8] Biobase_2.19.2 >> [9] GenomicRanges_1.11.30 >> [10] IRanges_1.17.35 >> [11] BiocGenerics_0.5.6 >> >> loaded via a namespace (and not attached): >> [1] biomaRt_2.15.0 bitops_1.0-5 BSgenome_1.27.1 DBI_0.2-5 >> [5] RCurl_1.95-3 Rsamtools_1.11.17 RSQLite_0.11.2 rtracklayer_1.19.9 >> [9] stats4_3.0.0 tools_3.0.0 XML_3.95-0.1 zlibbioc_1.5.0 >>> >> >> -- >> Sent via the guest posting facility at bioconductor.org. >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at r-project.org >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD REPLY •

Login before adding your answer.

Similar Posts
Loading Similar Posts
Traffic: 744 users visited in the last hour
Content Search
Users
Tags
Badges
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6