edgeR
1
0
Entering edit mode
@sridhara-gupta-kunjeti-4449
Last seen 9.6 years ago
United States
Hello, I want to analyze DGE for three different groups (for eg., gpA, B and C). I know that this will analyze only two groups at a time, which is fine for my analysis. But, I have the counts for all the groups in one txt file. When I run exact test, it will analyze for gp A- gp B. My question is if I want to run the analysis for gpA and gp C what command do I need to use. Alternatively, if I load the data for two gps at time, will the p.value change as against to when all the groups are loaded into R. Any help or suggestions will be appreciated. Thanks, Sridhara -- Sridhara G Kunjeti PhD Candidate University of Delaware Department of Plant and Soil Science email- sridhara@udel.edu Ph: 832-566-0011 [[alternative HTML version deleted]]
• 1.4k views
ADD COMMENT
0
Entering edit mode
@sridhara-gupta-kunjeti-4449
Last seen 9.6 years ago
United States
In continuation with my previous email. Here are the codes that I have used. > setwd("C:/Users/SRIDHARA/Documents/Sequence analysis/02-Pphaseoli/Pphaseoli-ExpressionDataTable/Filtered") > library(edgeR) > raw.data <- read.delim("Pp-Rdata.txt") > names(raw.data) [1] "ID" "F0a" "F0b" "P3a" "P3b" "P6a" "P6b" "LEN" > d <- raw.data[, 2:7] > rownames(d) <- raw.data[,1] > group <- c(rep("F0", 2), rep("P3", 2)rep("P6", 2)) Error: unexpected symbol in "group <- c(rep("F0", 2), rep("P3", 2)rep" > group <- c(rep("F0", 2), rep("P3", 2), rep("P6", 2)) > group [1] "F0" "F0" "P3" "P3" "P6" "P6" > d <- DGEList(counts = d, group = group) Calculating library sizes from column totals. > d <- estimateCommonDisp(d) > de.com <- exactTest(d) Comparison of groups: P3 - F0 > d <- estimateTagwiseDisp(d, prior.n = 10, grid.length = 500) Using grid search to estimate tagwise dispersion. where as when if I want to analyze between F0 and P6 the codes that I used are: > d6 <- extimageCommonDisp(d, pair = c("F0", "P6")) Error: could not find function "extimageCommonDisp" > d6 <- estimateCommonDisp(d, pair = c("F0", "P6")) Error in estimateCommonDisp(d, pair = c("F0", "P6")) : unused argument(s) (pair = c("F0", "P6")) Thanks, Sridhara On Fri, Mar 4, 2011 at 8:17 PM, Sridhara Gupta Kunjeti <sridhara@udel.edu>wrote: > Hello, > I want to analyze DGE for three different groups (for eg., gpA, B and C). I > know that this will analyze only two groups at a time, which is fine for my > analysis. But, I have the counts for all the groups in one txt file. When I > run exact test, it will analyze for gp A- gp B. My question is if I want to > run the analysis for gpA and gp C what command do I need to use. > > Alternatively, if I load the data for two gps at time, will the p.value > change as against to when all the groups are loaded into R. > > Any help or suggestions will be appreciated. > > Thanks, > Sridhara > > > > -- > Sridhara G Kunjeti > PhD Candidate > University of Delaware > Department of Plant and Soil Science > email- sridhara@udel.edu > Ph: 832-566-0011 > -- Sridhara G Kunjeti PhD Candidate University of Delaware Department of Plant and Soil Science email- sridhara@udel.edu Ph: 832-566-0011 [[alternative HTML version deleted]]
ADD COMMENT
0
Entering edit mode
Try using one 'DGEList' with all your data, (all the usual steps,) then choose what pair you want to test with: de.3 <- exactTest(d, pair=c("F0","F3")) de.6 <- exactTest(d, pair=c("F0","F6")) Also see ?exactTest and the user's guide. Cheers, Mark > In continuation with my previous email. Here are the codes that I have > used. >> setwd("C:/Users/SRIDHARA/Documents/Sequence > analysis/02-Pphaseoli/Pphaseoli-ExpressionDataTable/Filtered") >> library(edgeR) >> raw.data <- read.delim("Pp-Rdata.txt") >> names(raw.data) > [1] "ID" "F0a" "F0b" "P3a" "P3b" "P6a" "P6b" "LEN" >> d <- raw.data[, 2:7] >> rownames(d) <- raw.data[,1] >> group <- c(rep("F0", 2), rep("P3", 2)rep("P6", 2)) > Error: unexpected symbol in "group <- c(rep("F0", 2), rep("P3", 2)rep" >> group <- c(rep("F0", 2), rep("P3", 2), rep("P6", 2)) >> group > [1] "F0" "F0" "P3" "P3" "P6" "P6" >> d <- DGEList(counts = d, group = group) > Calculating library sizes from column totals. >> d <- estimateCommonDisp(d) >> de.com <- exactTest(d) > Comparison of groups: P3 - F0 >> d <- estimateTagwiseDisp(d, prior.n = 10, grid.length = 500) > Using grid search to estimate tagwise dispersion. > > where as when if I want to analyze between F0 and P6 the codes that I used > are: >> d6 <- extimageCommonDisp(d, pair = c("F0", "P6")) > Error: could not find function "extimageCommonDisp" >> d6 <- estimateCommonDisp(d, pair = c("F0", "P6")) > Error in estimateCommonDisp(d, pair = c("F0", "P6")) : > unused argument(s) (pair = c("F0", "P6")) > > Thanks, > Sridhara > > > On Fri, Mar 4, 2011 at 8:17 PM, Sridhara Gupta Kunjeti > <sridhara at="" udel.edu="">wrote: > >> Hello, >> I want to analyze DGE for three different groups (for eg., gpA, B and >> C). I >> know that this will analyze only two groups at a time, which is fine for >> my >> analysis. But, I have the counts for all the groups in one txt file. >> When I >> run exact test, it will analyze for gp A- gp B. My question is if I want >> to >> run the analysis for gpA and gp C what command do I need to use. >> >> Alternatively, if I load the data for two gps at time, will the p.value >> change as against to when all the groups are loaded into R. >> >> Any help or suggestions will be appreciated. >> >> Thanks, >> Sridhara >> >> >> >> -- >> Sridhara G Kunjeti >> PhD Candidate >> University of Delaware >> Department of Plant and Soil Science >> email- sridhara at udel.edu >> Ph: 832-566-0011 >> > > > > -- > Sridhara G Kunjeti > PhD Candidate > University of Delaware > Department of Plant and Soil Science > email- sridhara at udel.edu > Ph: 832-566-0011 > > [[alternative HTML version deleted]] > > _______________________________________________ > Bioconductor mailing list > Bioconductor at r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > ______________________________________________________________________ The information in this email is confidential and intend...{{dropped:4}}
ADD REPLY
0
Entering edit mode
Hello Mark, Thanks you very much for the information. Many thanks! Sridhara On Sat, Mar 5, 2011 at 1:01 AM, Mark Robinson <mrobinson@wehi.edu.au> wrote: > > Try using one 'DGEList' with all your data, (all the usual steps,) then > choose what pair you want to test with: > > de.3 <- exactTest(d, pair=c("F0","F3")) > de.6 <- exactTest(d, pair=c("F0","F6")) > > Also see ?exactTest and the user's guide. > > Cheers, > Mark > > > In continuation with my previous email. Here are the codes that I have > > used. > >> setwd("C:/Users/SRIDHARA/Documents/Sequence > > analysis/02-Pphaseoli/Pphaseoli-ExpressionDataTable/Filtered") > >> library(edgeR) > >> raw.data <- read.delim("Pp-Rdata.txt") > >> names(raw.data) > > [1] "ID" "F0a" "F0b" "P3a" "P3b" "P6a" "P6b" "LEN" > >> d <- raw.data[, 2:7] > >> rownames(d) <- raw.data[,1] > >> group <- c(rep("F0", 2), rep("P3", 2)rep("P6", 2)) > > Error: unexpected symbol in "group <- c(rep("F0", 2), rep("P3", 2)rep" > >> group <- c(rep("F0", 2), rep("P3", 2), rep("P6", 2)) > >> group > > [1] "F0" "F0" "P3" "P3" "P6" "P6" > >> d <- DGEList(counts = d, group = group) > > Calculating library sizes from column totals. > >> d <- estimateCommonDisp(d) > >> de.com <- exactTest(d) > > Comparison of groups: P3 - F0 > >> d <- estimateTagwiseDisp(d, prior.n = 10, grid.length = 500) > > Using grid search to estimate tagwise dispersion. > > > > where as when if I want to analyze between F0 and P6 the codes that I > used > > are: > >> d6 <- extimageCommonDisp(d, pair = c("F0", "P6")) > > Error: could not find function "extimageCommonDisp" > >> d6 <- estimateCommonDisp(d, pair = c("F0", "P6")) > > Error in estimateCommonDisp(d, pair = c("F0", "P6")) : > > unused argument(s) (pair = c("F0", "P6")) > > > > Thanks, > > Sridhara > > > > > > On Fri, Mar 4, 2011 at 8:17 PM, Sridhara Gupta Kunjeti > > <sridhara@udel.edu>wrote: > > > >> Hello, > >> I want to analyze DGE for three different groups (for eg., gpA, B and > >> C). I > >> know that this will analyze only two groups at a time, which is fine for > >> my > >> analysis. But, I have the counts for all the groups in one txt file. > >> When I > >> run exact test, it will analyze for gp A- gp B. My question is if I want > >> to > >> run the analysis for gpA and gp C what command do I need to use. > >> > >> Alternatively, if I load the data for two gps at time, will the p.value > >> change as against to when all the groups are loaded into R. > >> > >> Any help or suggestions will be appreciated. > >> > >> Thanks, > >> Sridhara > >> > >> > >> > >> -- > >> Sridhara G Kunjeti > >> PhD Candidate > >> University of Delaware > >> Department of Plant and Soil Science > >> email- sridhara@udel.edu > >> Ph: 832-566-0011 > >> > > > > > > > > -- > > Sridhara G Kunjeti > > PhD Candidate > > University of Delaware > > Department of Plant and Soil Science > > email- sridhara@udel.edu > > Ph: 832-566-0011 > > > > [[alternative HTML version deleted]] > > > > _______________________________________________ > > Bioconductor mailing list > > Bioconductor@r-project.org > > https://stat.ethz.ch/mailman/listinfo/bioconductor > > Search the archives: > > http://news.gmane.org/gmane.science.biology.informatics.conductor > > > > > > ______________________________________________________________________ > The information in this email is confidential and inte...{{dropped:20}}
ADD REPLY

Login before adding your answer.

Traffic: 800 users visited in the last hour
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6