ReadAffy crashes on mac
1
0
Entering edit mode
Luo Weijun ★ 1.6k
@luo-weijun-1783
Last seen 18 months ago
United States
Dear all, I use BioConductor affy package on a Mac OS X 10.4 machine, ReadAffy crashes R. The same problem has been reported earlier by another user (see http://thread.gmane.org/gmane.science.biology.informatics.conduct or/16747), but no solution has been suggested yet. Here I show you the error message, session and debug information for R 2.7.1, but the same problem has been observed under R 2.6.0 (both 32 bit and 64 bit versions). Please let me know if you have any ideas/comments/suggestions. Thanks a lot! Weijun ##error message > library(affy) ... > fns <- list.celfiles(path='/bmpEarly',full.names=TRUE) > hmscBmp<- ReadAffy(filenames=fns[1:2]) *** caught bus error *** address 0x2008000, cause 'invalid alignment' *** caught segfault *** address 0x40568008, cause 'memory not mapped' ##session > sessionInfo() R version 2.7.1 (2008-06-23) powerpc-apple-darwin8.10.1 locale: C attached base packages: [1] tools stats graphics grDevices utils datasets methods [8] base other attached packages: [1] affy_1.18.2 preprocessCore_1.2.0 affyio_1.8.0 [4] Biobase_2.0.1 ##debug information luow$ r -d gdb --vanilla GNU gdb 6.1-20040303 (Apple version gdb-437) (Sun Dec 25 08:31:29 GMT 2005) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "powerpc-apple-darwin"...unable to read unknown load command 0x1b unable to read unknown load command 0x1b unable to read unknown load command 0x1b unable to read unknown load command 0x1b bfd_mach_o_scan: unknown architecture 0x1000007/0x3 Reading symbols for shared libraries ..... done unable to read unknown load command 0x1b (gdb) run Starting program: /Library/Frameworks/R.framework/Versions/2.7/Resources/bin/exec/ppc/R --vanilla bfd_mach_o_scan: unknown architecture 0x1000007/0x3 Reading symbols for shared libraries .......+...........+ done unable to read unknown load command 0x1b Reading symbols for shared libraries . done R version 2.7.1 (2008-06-23) Copyright (C) 2008 The R Foundation for Statistical Computing ISBN 3-900051-07-0 Reading symbols for shared libraries . done R is free software and comes with ABSOLUTELY NO WARRANTY. You are welcome to redistribute it under certain conditions. Type 'license()' or 'licence()' for distribution details. Natural language support but running in an English locale R is a collaborative project with many contributors. Type 'contributors()' for more information and 'citation()' on how to cite R or R packages in publications. Type 'demo()' for some demos, 'help()' for on-line help, or 'help.start()' for an HTML browser interface to help. Type 'q()' to quit R. unable to read unknown load command 0x1b Reading symbols for shared libraries ........................................................ done unable to read unknown load command 0x1b Reading symbols for shared libraries . done > library(affy) Loading required package: Biobase Loading required package: tools unable to read unknown load command 0x1b Reading symbols for shared libraries . done unable to read unknown load command 0x1b Reading symbols for shared libraries . done Welcome to Bioconductor Vignettes contain introductory material. To view, type 'openVignette()'. To cite Bioconductor, see 'citation("Biobase")' and for packages 'citation(pkgname)'. Loading required package: affyio unable to read unknown load command 0x1b Reading symbols for shared libraries . done Loading required package: preprocessCore unable to read unknown load command 0x1b unable to read unknown load command 0x1b Reading symbols for shared libraries .. done unable to read unknown load command 0x1b Reading symbols for shared libraries . done > fns <- list.celfiles(path='/Users/luow/project/microarraydata/celfil es/Mike/bmpEarly',full.names=TRUE) > hmscBmp<- ReadAffy(filenames=fns[1:2]) Could not find OSO file: "" (gdb)
affy BUS affy BUS • 1.6k views
ADD COMMENT •
0
Entering edit mode
@henrik-bengtsson-4333
Last seen 7 months ago
United States
Hints for more troubleshooting: * Your example use two CEL files. Can you reproduce the error for a single CEL file? * What chip type? * Are these ASCII or binary CEL files? * Try to use affxparser to read the buggy CEL file, e.g. readCelHeader(), readCel() etc. Does that also give an error? Basically, can it be because the CEL file is corrupt? It should core dump, but it is a start. My $0.02 /Henrik On Sat, Jul 19, 2008 at 11:56 AM, Luo Weijun <luo_weijun at="" yahoo.com=""> wrote: > Dear all, > I use BioConductor affy package on a Mac OS X 10.4 machine, ReadAffy crashes R. The same problem has been reported earlier by another user (see http://thread.gmane.org/gmane.science.biology.informatics.conduct or/16747), but no solution has been suggested yet. > Here I show you the error message, session and debug information for R 2.7.1, but the same problem has been observed under R 2.6.0 (both 32 bit and 64 bit versions). > Please let me know if you have any ideas/comments/suggestions. Thanks a lot! > Weijun > > > > ##error message >> library(affy) > ... >> fns <- list.celfiles(path='/bmpEarly',full.names=TRUE) >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > > *** caught bus error *** > address 0x2008000, cause 'invalid alignment' > > *** caught segfault *** > address 0x40568008, cause 'memory not mapped' > > ##session >> sessionInfo() > R version 2.7.1 (2008-06-23) > powerpc-apple-darwin8.10.1 > > locale: > C > > attached base packages: > [1] tools stats graphics grDevices utils datasets methods > [8] base > > other attached packages: > [1] affy_1.18.2 preprocessCore_1.2.0 affyio_1.8.0 > [4] Biobase_2.0.1 > > > ##debug information > luow$ r -d gdb --vanilla > GNU gdb 6.1-20040303 (Apple version gdb-437) (Sun Dec 25 08:31:29 GMT 2005) > Copyright 2004 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you are > welcome to change it and/or distribute copies of it under certain conditions. > Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for details. > This GDB was configured as "powerpc-apple-darwin"...unable to read unknown load command 0x1b > unable to read unknown load command 0x1b > unable to read unknown load command 0x1b > unable to read unknown load command 0x1b > bfd_mach_o_scan: unknown architecture 0x1000007/0x3 > Reading symbols for shared libraries ..... done > unable to read unknown load command 0x1b > > (gdb) run > Starting program: /Library/Frameworks/R.framework/Versions/2.7/Resources/bin/exec/ppc/R --vanilla > bfd_mach_o_scan: unknown architecture 0x1000007/0x3 > Reading symbols for shared libraries .......+...........+ done > unable to read unknown load command 0x1b > Reading symbols for shared libraries . done > > R version 2.7.1 (2008-06-23) > Copyright (C) 2008 The R Foundation for Statistical Computing > ISBN 3-900051-07-0 > > Reading symbols for shared libraries . done > R is free software and comes with ABSOLUTELY NO WARRANTY. > You are welcome to redistribute it under certain conditions. > Type 'license()' or 'licence()' for distribution details. > > Natural language support but running in an English locale > > R is a collaborative project with many contributors. > Type 'contributors()' for more information and > 'citation()' on how to cite R or R packages in publications. > > Type 'demo()' for some demos, 'help()' for on-line help, or > 'help.start()' for an HTML browser interface to help. > Type 'q()' to quit R. > > unable to read unknown load command 0x1b > Reading symbols for shared libraries ........................................................ done > unable to read unknown load command 0x1b > Reading symbols for shared libraries . done >> library(affy) > Loading required package: Biobase > Loading required package: tools > unable to read unknown load command 0x1b > Reading symbols for shared libraries . done > unable to read unknown load command 0x1b > Reading symbols for shared libraries . done > > Welcome to Bioconductor > > Vignettes contain introductory material. To view, type > 'openVignette()'. To cite Bioconductor, see > 'citation("Biobase")' and for packages 'citation(pkgname)'. > > Loading required package: affyio > unable to read unknown load command 0x1b > Reading symbols for shared libraries . done > Loading required package: preprocessCore > unable to read unknown load command 0x1b > unable to read unknown load command 0x1b > Reading symbols for shared libraries .. done > unable to read unknown load command 0x1b > Reading symbols for shared libraries . done >> fns <- list.celfiles(path='/Users/luow/project/microarraydata/celfi les/Mike/bmpEarly',full.names=TRUE) >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > Could not find OSO file: "" > (gdb) > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >
ADD COMMENT •
0
Entering edit mode
Thanks a lot, Henrik, I tried affxparser. Both readCelHeader() and readCel() worked well on either single or multiple CEL files. These binary CEL files. I think they should be version 4, but the readCelHeader read as version 1 (see the results). I am wondering is there any way to create an AffyBatch object from the readCel() result object? I need to use special preprocessing method which takes AffyBatch as input. Or I may convert these CEL files to version 3 CEL format, where ReadAffy works fine. convertCel only writes version 4. Weijun #header information > header <- readCelHeader(celFile) > header $filename [1] "~/bmpEarly/a1hr_6314.CEL" $version [1] 1 $cols [1] 1164 $rows [1] 1164 $total [1] 1354896 $algorithm [1] "Feature Extraction Cell Generation" ? --- On Sat, 7/19/08, Henrik Bengtsson <hb at="" stat.berkeley.edu=""> wrote: > From: Henrik Bengtsson <hb at="" stat.berkeley.edu=""> > Subject: Re: [BioC] ReadAffy crashes on mac > To: luo_weijun at yahoo.com > Cc: Bioconductor at stat.math.ethz.ch > Date: Saturday, July 19, 2008, 5:53 PM > Hints for more troubleshooting: > > * Your example use two CEL files. Can you reproduce the > error for a > single CEL file? > * What chip type? > * Are these ASCII or binary CEL files? > * Try to use affxparser to read the buggy CEL file, e.g. > readCelHeader(), readCel() etc. Does that also give an > error? > > Basically, can it be because the CEL file is corrupt? It > should core > dump, but it is a start. > > My $0.02 > > /Henrik > > > On Sat, Jul 19, 2008 at 11:56 AM, Luo Weijun > <luo_weijun at="" yahoo.com=""> wrote: > > Dear all, > > I use BioConductor affy package on a Mac OS X 10.4 > machine, ReadAffy crashes R. The same problem has been > reported earlier by another user (see > http://thread.gmane.org/gmane.science.biology.informatics.conductor/ 16747), > but no solution has been suggested yet. > > Here I show you the error message, session and debug > information for R 2.7.1, but the same problem has been > observed under R 2.6.0 (both 32 bit and 64 bit versions). > > Please let me know if you have any > ideas/comments/suggestions. Thanks a lot! > > Weijun > > > > > > > > ##error message > >> library(affy) > > ... > >> fns <- > list.celfiles(path='/bmpEarly',full.names=TRUE) > >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > > > > *** caught bus error *** > > address 0x2008000, cause 'invalid alignment' > > > > *** caught segfault *** > > address 0x40568008, cause 'memory not mapped' > > > > ##session > >> sessionInfo() > > R version 2.7.1 (2008-06-23) > > powerpc-apple-darwin8.10.1 > > > > locale: > > C > > > > attached base packages: > > [1] tools stats graphics grDevices utils > datasets methods > > [8] base > > > > other attached packages: > > [1] affy_1.18.2 preprocessCore_1.2.0 > affyio_1.8.0 > > [4] Biobase_2.0.1 > > > > > > ##debug information > > luow$ r -d gdb --vanilla > > GNU gdb 6.1-20040303 (Apple version gdb-437) (Sun Dec > 25 08:31:29 GMT 2005) > > Copyright 2004 Free Software Foundation, Inc. > > GDB is free software, covered by the GNU General > Public License, and you are > > welcome to change it and/or distribute copies of it > under certain conditions. > > Type "show copying" to see the conditions. > > There is absolutely no warranty for GDB. Type > "show warranty" for details. > > This GDB was configured as > "powerpc-apple-darwin"...unable to read unknown > load command 0x1b > > unable to read unknown load command 0x1b > > unable to read unknown load command 0x1b > > unable to read unknown load command 0x1b > > bfd_mach_o_scan: unknown architecture 0x1000007/0x3 > > Reading symbols for shared libraries ..... done > > unable to read unknown load command 0x1b > > > > (gdb) run > > Starting program: > /Library/Frameworks/R.framework/Versions/2.7/Resources/bin/exec/ppc/R > --vanilla > > bfd_mach_o_scan: unknown architecture 0x1000007/0x3 > > Reading symbols for shared libraries > .......+...........+ done > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries . done > > > > R version 2.7.1 (2008-06-23) > > Copyright (C) 2008 The R Foundation for Statistical > Computing > > ISBN 3-900051-07-0 > > > > Reading symbols for shared libraries . done > > R is free software and comes with ABSOLUTELY NO > WARRANTY. > > You are welcome to redistribute it under certain > conditions. > > Type 'license()' or 'licence()' for > distribution details. > > > > Natural language support but running in an English > locale > > > > R is a collaborative project with many contributors. > > Type 'contributors()' for more information and > > 'citation()' on how to cite R or R packages in > publications. > > > > Type 'demo()' for some demos, 'help()' > for on-line help, or > > 'help.start()' for an HTML browser interface > to help. > > Type 'q()' to quit R. > > > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries > ........................................................ > done > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries . done > >> library(affy) > > Loading required package: Biobase > > Loading required package: tools > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries . done > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries . done > > > > Welcome to Bioconductor > > > > Vignettes contain introductory material. To view, > type > > 'openVignette()'. To cite Bioconductor, see > > 'citation("Biobase")' and for > packages 'citation(pkgname)'. > > > > Loading required package: affyio > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries . done > > Loading required package: preprocessCore > > unable to read unknown load command 0x1b > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries .. done > > unable to read unknown load command 0x1b > > Reading symbols for shared libraries . done > >> fns <- > list.celfiles(path='/Users/luow/project/microarraydata/celfiles/Mike /bmpEarly',full.names=TRUE) > >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > > Could not find OSO file: "" > > (gdb) > > > > _______________________________________________ > > Bioconductor mailing list > > Bioconductor at stat.math.ethz.ch > > https://stat.ethz.ch/mailman/listinfo/bioconductor > > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > >
ADD REPLY •
0
Entering edit mode
Hi, The version 1 CEL file format is actually the most recent one from Affymetrix - it is a binary format known as the Calvin file format or the Command Console (CC) format. The old ASCII format is reported as version 3 and the binary (XDA) format is reported as version 4. ReadAffy of 'affy' utilized the 'affyio' package to read CEL files. I think that affyio supports the CC (v1) file format as well, but I can't bet on it. So for further troubleshooting I would recommend that start a fresh R session and only load 'affyio' and try its function to read the CEL files. Try with read.celfile.header(), read.celfile() and read.celfile.probeintensity.matrices() and see if they crash as well. That will help Ben Bolstad to troubleshoot affyio. If worse comes to worse, you can indeed convert the CEL files to v4 (binary; XDA) and the load it in. But, ideally you shouldn't have to convert files. Also, you should avoid working ASCII files - that's old school slow and memory consuming. My $1.02 /Henrik On Sat, Jul 19, 2008 at 5:43 PM, Luo Weijun <luo_weijun at="" yahoo.com=""> wrote: > Thanks a lot, Henrik, > I tried affxparser. Both readCelHeader() and readCel() worked well on either single or multiple CEL files. These binary CEL files. I think they should be version 4, but the readCelHeader read as version 1 (see the results). > I am wondering is there any way to create an AffyBatch object from the readCel() result object? I need to use special preprocessing method which takes AffyBatch as input. Or I may convert these CEL files to version 3 CEL format, where ReadAffy works fine. convertCel only writes version 4. > Weijun > > #header information >> header <- readCelHeader(celFile) >> header > $filename > [1] "~/bmpEarly/a1hr_6314.CEL" > > $version > [1] 1 > > $cols > [1] 1164 > > $rows > [1] 1164 > > $total > [1] 1354896 > > $algorithm > [1] "Feature Extraction Cell Generation" > ? > > > > --- On Sat, 7/19/08, Henrik Bengtsson <hb at="" stat.berkeley.edu=""> wrote: > >> From: Henrik Bengtsson <hb at="" stat.berkeley.edu=""> >> Subject: Re: [BioC] ReadAffy crashes on mac >> To: luo_weijun at yahoo.com >> Cc: Bioconductor at stat.math.ethz.ch >> Date: Saturday, July 19, 2008, 5:53 PM >> Hints for more troubleshooting: >> >> * Your example use two CEL files. Can you reproduce the >> error for a >> single CEL file? >> * What chip type? >> * Are these ASCII or binary CEL files? >> * Try to use affxparser to read the buggy CEL file, e.g. >> readCelHeader(), readCel() etc. Does that also give an >> error? >> >> Basically, can it be because the CEL file is corrupt? It >> should core >> dump, but it is a start. >> >> My $0.02 >> >> /Henrik >> >> >> On Sat, Jul 19, 2008 at 11:56 AM, Luo Weijun >> <luo_weijun at="" yahoo.com=""> wrote: >> > Dear all, >> > I use BioConductor affy package on a Mac OS X 10.4 >> machine, ReadAffy crashes R. The same problem has been >> reported earlier by another user (see >> http://thread.gmane.org/gmane.science.biology.informatics.conductor /16747), >> but no solution has been suggested yet. >> > Here I show you the error message, session and debug >> information for R 2.7.1, but the same problem has been >> observed under R 2.6.0 (both 32 bit and 64 bit versions). >> > Please let me know if you have any >> ideas/comments/suggestions. Thanks a lot! >> > Weijun >> > >> > >> > >> > ##error message >> >> library(affy) >> > ... >> >> fns <- >> list.celfiles(path='/bmpEarly',full.names=TRUE) >> >> hmscBmp<- ReadAffy(filenames=fns[1:2]) >> > >> > *** caught bus error *** >> > address 0x2008000, cause 'invalid alignment' >> > >> > *** caught segfault *** >> > address 0x40568008, cause 'memory not mapped' >> > >> > ##session >> >> sessionInfo() >> > R version 2.7.1 (2008-06-23) >> > powerpc-apple-darwin8.10.1 >> > >> > locale: >> > C >> > >> > attached base packages: >> > [1] tools stats graphics grDevices utils >> datasets methods >> > [8] base >> > >> > other attached packages: >> > [1] affy_1.18.2 preprocessCore_1.2.0 >> affyio_1.8.0 >> > [4] Biobase_2.0.1 >> > >> > >> > ##debug information >> > luow$ r -d gdb --vanilla >> > GNU gdb 6.1-20040303 (Apple version gdb-437) (Sun Dec >> 25 08:31:29 GMT 2005) >> > Copyright 2004 Free Software Foundation, Inc. >> > GDB is free software, covered by the GNU General >> Public License, and you are >> > welcome to change it and/or distribute copies of it >> under certain conditions. >> > Type "show copying" to see the conditions. >> > There is absolutely no warranty for GDB. Type >> "show warranty" for details. >> > This GDB was configured as >> "powerpc-apple-darwin"...unable to read unknown >> load command 0x1b >> > unable to read unknown load command 0x1b >> > unable to read unknown load command 0x1b >> > unable to read unknown load command 0x1b >> > bfd_mach_o_scan: unknown architecture 0x1000007/0x3 >> > Reading symbols for shared libraries ..... done >> > unable to read unknown load command 0x1b >> > >> > (gdb) run >> > Starting program: >> /Library/Frameworks/R.framework/Versions/2.7/Resources/bin/exec/ppc/R >> --vanilla >> > bfd_mach_o_scan: unknown architecture 0x1000007/0x3 >> > Reading symbols for shared libraries >> .......+...........+ done >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries . done >> > >> > R version 2.7.1 (2008-06-23) >> > Copyright (C) 2008 The R Foundation for Statistical >> Computing >> > ISBN 3-900051-07-0 >> > >> > Reading symbols for shared libraries . done >> > R is free software and comes with ABSOLUTELY NO >> WARRANTY. >> > You are welcome to redistribute it under certain >> conditions. >> > Type 'license()' or 'licence()' for >> distribution details. >> > >> > Natural language support but running in an English >> locale >> > >> > R is a collaborative project with many contributors. >> > Type 'contributors()' for more information and >> > 'citation()' on how to cite R or R packages in >> publications. >> > >> > Type 'demo()' for some demos, 'help()' >> for on-line help, or >> > 'help.start()' for an HTML browser interface >> to help. >> > Type 'q()' to quit R. >> > >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries >> ........................................................ >> done >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries . done >> >> library(affy) >> > Loading required package: Biobase >> > Loading required package: tools >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries . done >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries . done >> > >> > Welcome to Bioconductor >> > >> > Vignettes contain introductory material. To view, >> type >> > 'openVignette()'. To cite Bioconductor, see >> > 'citation("Biobase")' and for >> packages 'citation(pkgname)'. >> > >> > Loading required package: affyio >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries . done >> > Loading required package: preprocessCore >> > unable to read unknown load command 0x1b >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries .. done >> > unable to read unknown load command 0x1b >> > Reading symbols for shared libraries . done >> >> fns <- >> list.celfiles(path='/Users/luow/project/microarraydata/celfiles/Mik e/bmpEarly',full.names=TRUE) >> >> hmscBmp<- ReadAffy(filenames=fns[1:2]) >> > Could not find OSO file: "" >> > (gdb) >> > >> > _______________________________________________ >> > Bioconductor mailing list >> > Bioconductor at stat.math.ethz.ch >> > https://stat.ethz.ch/mailman/listinfo/bioconductor >> > Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor >> > > > > >
ADD REPLY •
0
Entering edit mode
Thanks, Henrik. I load affyio package alone; read.celfile.header worked fine, but not read.celfile. I paste the session below. Could Ben look at this issue? Please let me know if you need anything. Thanks a lot! Weijun ? > celFiles <- list.files(path='~/bmpEarly',pattern="[.](c|C)(e|E)(l|L) $",full.names=TRUE) > header2<-read.celfile.header(celFiles) > header2 $cdfName [1] "" $`CEL dimensions` [1] -1945894912 -1945894912 > cel2<-read.celfile(celFiles) *** caught bus error *** address 0x1285000, cause 'invalid alignment' Traceback: 1: .Call("R_read_cel_file", filename, intensity.means.only, PACKAGE = "affyio") 2: read.celfile(celFiles) Possible actions: 1: abort (with core dump, if enabled) 2: normal R exit 3: exit R without saving workspace 4: exit R saving workspace R(27434) malloc: *** Deallocation of a pointer not malloced: 0x1129320; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug R(27434) malloc: *** Deallocation of a pointer not malloced: 0x112b500; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug Selection: 1 aborting ... Bus error > sessionInfo() R version 2.7.1 (2008-06-23) powerpc-apple-darwin8.10.1 locale: C attached base packages: [1] stats graphics grDevices utils datasets methods base other attached packages: [1] affyio_1.8.0 --- On Sat, 7/19/08, Henrik Bengtsson <hb at="" stat.berkeley.edu=""> wrote: > From: Henrik Bengtsson <hb at="" stat.berkeley.edu=""> > Subject: Re: [BioC] ReadAffy crashes on mac > To: luo_weijun at yahoo.com > Cc: Bioconductor at stat.math.ethz.ch > Date: Saturday, July 19, 2008, 9:27 PM > Hi, > > The version 1 CEL file format is actually the most recent > one from > Affymetrix - it is a binary format known as the Calvin file > format or > the Command Console (CC) format. The old ASCII format is > reported as > version 3 and the binary (XDA) format is reported as > version 4. > > ReadAffy of 'affy' utilized the 'affyio' > package to read CEL files. I > think that affyio supports the CC (v1) file format as well, > but I > can't bet on it. So for further troubleshooting I > would recommend > that start a fresh R session and only load 'affyio' > and try its > function to read the CEL files. Try with > read.celfile.header(), > read.celfile() and read.celfile.probeintensity.matrices() > and see if > they crash as well. That will help Ben Bolstad to > troubleshoot > affyio. > > If worse comes to worse, you can indeed convert the CEL > files to v4 > (binary; XDA) and the load it in. But, ideally you > shouldn't have to > convert files. Also, you should avoid working ASCII files > - that's > old school slow and memory consuming. > > My $1.02 > > /Henrik > > On Sat, Jul 19, 2008 at 5:43 PM, Luo Weijun > <luo_weijun at="" yahoo.com=""> wrote: > > Thanks a lot, Henrik, > > I tried affxparser. Both readCelHeader() and readCel() > worked well on either single or multiple CEL files. These > binary CEL files. I think they should be version 4, but the > readCelHeader read as version 1 (see the results). > > I am wondering is there any way to create an AffyBatch > object from the readCel() result object? I need to use > special preprocessing method which takes AffyBatch as > input. Or I may convert these CEL files to version 3 CEL > format, where ReadAffy works fine. convertCel only writes > version 4. > > Weijun > > > > #header information > >> header <- readCelHeader(celFile) > >> header > > $filename > > [1] "~/bmpEarly/a1hr_6314.CEL" > > > > $version > > [1] 1 > > > > $cols > > [1] 1164 > > > > $rows > > [1] 1164 > > > > $total > > [1] 1354896 > > > > $algorithm > > [1] "Feature Extraction Cell Generation" > > ? > > > > > > > > --- On Sat, 7/19/08, Henrik Bengtsson > <hb at="" stat.berkeley.edu=""> wrote: > > > >> From: Henrik Bengtsson > <hb at="" stat.berkeley.edu=""> > >> Subject: Re: [BioC] ReadAffy crashes on mac > >> To: luo_weijun at yahoo.com > >> Cc: Bioconductor at stat.math.ethz.ch > >> Date: Saturday, July 19, 2008, 5:53 PM > >> Hints for more troubleshooting: > >> > >> * Your example use two CEL files. Can you > reproduce the > >> error for a > >> single CEL file? > >> * What chip type? > >> * Are these ASCII or binary CEL files? > >> * Try to use affxparser to read the buggy CEL > file, e.g. > >> readCelHeader(), readCel() etc. Does that also > give an > >> error? > >> > >> Basically, can it be because the CEL file is > corrupt? It > >> should core > >> dump, but it is a start. > >> > >> My $0.02 > >> > >> /Henrik > >> > >> > >> On Sat, Jul 19, 2008 at 11:56 AM, Luo Weijun > >> <luo_weijun at="" yahoo.com=""> wrote: > >> > Dear all, > >> > I use BioConductor affy package on a Mac OS X > 10.4 > >> machine, ReadAffy crashes R. The same problem has > been > >> reported earlier by another user (see > >> > http://thread.gmane.org/gmane.science.biology.informatics.conductor/ 16747), > >> but no solution has been suggested yet. > >> > Here I show you the error message, session > and debug > >> information for R 2.7.1, but the same problem has > been > >> observed under R 2.6.0 (both 32 bit and 64 bit > versions). > >> > Please let me know if you have any > >> ideas/comments/suggestions. Thanks a lot! > >> > Weijun > >> > > >> > > >> > > >> > ##error message > >> >> library(affy) > >> > ... > >> >> fns <- > >> > list.celfiles(path='/bmpEarly',full.names=TRUE) > >> >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > >> > > >> > *** caught bus error *** > >> > address 0x2008000, cause 'invalid > alignment' > >> > > >> > *** caught segfault *** > >> > address 0x40568008, cause 'memory not > mapped' > >> > > >> > ##session > >> >> sessionInfo() > >> > R version 2.7.1 (2008-06-23) > >> > powerpc-apple-darwin8.10.1 > >> > > >> > locale: > >> > C > >> > > >> > attached base packages: > >> > [1] tools stats graphics grDevices > utils > >> datasets methods > >> > [8] base > >> > > >> > other attached packages: > >> > [1] affy_1.18.2 preprocessCore_1.2.0 > >> affyio_1.8.0 > >> > [4] Biobase_2.0.1 > >> > > >> > > >> > ##debug information > >> > luow$ r -d gdb --vanilla > >> > GNU gdb 6.1-20040303 (Apple version gdb-437) > (Sun Dec > >> 25 08:31:29 GMT 2005) > >> > Copyright 2004 Free Software Foundation, Inc. > >> > GDB is free software, covered by the GNU > General > >> Public License, and you are > >> > welcome to change it and/or distribute copies > of it > >> under certain conditions. > >> > Type "show copying" to see the > conditions. > >> > There is absolutely no warranty for GDB. > Type > >> "show warranty" for details. > >> > This GDB was configured as > >> "powerpc-apple-darwin"...unable to read > unknown > >> load command 0x1b > >> > unable to read unknown load command 0x1b > >> > unable to read unknown load command 0x1b > >> > unable to read unknown load command 0x1b > >> > bfd_mach_o_scan: unknown architecture > 0x1000007/0x3 > >> > Reading symbols for shared libraries ..... > done > >> > unable to read unknown load command 0x1b > >> > > >> > (gdb) run > >> > Starting program: > >> > /Library/Frameworks/R.framework/Versions/2.7/Resources/bin/exec/ppc/R > >> --vanilla > >> > bfd_mach_o_scan: unknown architecture > 0x1000007/0x3 > >> > Reading symbols for shared libraries > >> .......+...........+ done > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries . done > >> > > >> > R version 2.7.1 (2008-06-23) > >> > Copyright (C) 2008 The R Foundation for > Statistical > >> Computing > >> > ISBN 3-900051-07-0 > >> > > >> > Reading symbols for shared libraries . done > >> > R is free software and comes with ABSOLUTELY > NO > >> WARRANTY. > >> > You are welcome to redistribute it under > certain > >> conditions. > >> > Type 'license()' or > 'licence()' for > >> distribution details. > >> > > >> > Natural language support but running in an > English > >> locale > >> > > >> > R is a collaborative project with many > contributors. > >> > Type 'contributors()' for more > information and > >> > 'citation()' on how to cite R or R > packages in > >> publications. > >> > > >> > Type 'demo()' for some demos, > 'help()' > >> for on-line help, or > >> > 'help.start()' for an HTML browser > interface > >> to help. > >> > Type 'q()' to quit R. > >> > > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries > >> > ........................................................ > >> done > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries . done > >> >> library(affy) > >> > Loading required package: Biobase > >> > Loading required package: tools > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries . done > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries . done > >> > > >> > Welcome to Bioconductor > >> > > >> > Vignettes contain introductory material. To > view, > >> type > >> > 'openVignette()'. To cite > Bioconductor, see > >> > 'citation("Biobase")' and > for > >> packages 'citation(pkgname)'. > >> > > >> > Loading required package: affyio > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries . done > >> > Loading required package: preprocessCore > >> > unable to read unknown load command 0x1b > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries .. done > >> > unable to read unknown load command 0x1b > >> > Reading symbols for shared libraries . done > >> >> fns <- > >> > list.celfiles(path='/Users/luow/project/microarraydata/celfiles/Mike /bmpEarly',full.names=TRUE) > >> >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > >> > Could not find OSO file: "" > >> > (gdb) > >> > > >> > > _______________________________________________ > >> > Bioconductor mailing list > >> > Bioconductor at stat.math.ethz.ch > >> > > https://stat.ethz.ch/mailman/listinfo/bioconductor > >> > Search the archives: > >> > http://news.gmane.org/gmane.science.biology.informatics.conductor > >> > > > > > > > > >
ADD REPLY •
0
Entering edit mode
Weijun, I took the CEL files that you sent me and am seeing no issues at my end. Granted I am on Linux rather than Mac OS X 10.4 (or any other OS X version) and do not have access to any such machine to do testing or other debugging. Both routine testing, and running through valgrind to see if there is anything weird showing up did not trigger anything. Meaning that there doesn't seem be anything obviously corrupt about the CEL files (which are indeed the Command Console format). That said, being as you are on a PPC machine, it could be some sort of endian issue or there is some other architectural difference (say in the size of a certain data type) that I am not taking into account. Visual examination of the code is not triggering anything obvious to me right now. Ben > library(affyio) > library(affy) Loading required package: Biobase Loading required package: tools Welcome to Bioconductor Vignettes contain introductory material. To view, type 'openVignette()'. To cite Bioconductor, see 'citation("Biobase")' and for packages 'citation(pkgname)'. Loading required package: preprocessCore > celnames <- list.celfiles()[1:2] > celnames [1] "BMP2 setA 12hr_6318.CEL" "BMP2 setA 16hr_6319.CEL" > Test1 <- read.celfile(celnames[1]) > Test2 <- read.celfile(celnames[1]) > names(Test1) [1] "HEADER" "INTENSITY" "MASKS" "OUTLIERS" > Test1$HEADER $cdfName [1] "HG-U133_Plus_2" $`CEL dimensions` [1] 1164 1164 $GridCornerUL [1] 279 214 $GridCornerUR [1] 8470 281 $GridCornerLR [1] 8403 8471 $GridCornerLL [1] 213 8405 $DatHeader [1] "" $Algorithm [1] "Feature Extraction Cell Generation" $AlgorithmParameters [1] "Percentile:75;CellMargin:2;OutlierHigh:1.500000;OutlierLow:1.004000;A lgVersion:;FixedCellSize:TRUE;FullFeatureWidth:7;FullFeatureHeight:7;I gnoreOutliersInShiftRows:;FeatureExtraction:TRUE;PoolWidthExtenstion:; PoolHeightExtension:;UseSubgrids:FALSE;RandomizePixels:FALSE;ErrorBasi s:StdvMean;StdMult:1.000000;" > myAbatch <- ReadAffy(filenames=celnames) > sessionInfo() R version 2.8.0 Under development (unstable) (2008-04-10 r45232) x86_64-unknown-linux-gnu locale: LC_CTYPE=en_US.utf8;LC_NUMERIC=C;LC_TIME=en_US.utf8;LC_COLLATE=en_US.u tf8;LC_MONETARY=C;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=C ;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATI ON=C attached base packages: [1] tools stats graphics grDevices utils datasets methods [8] base other attached packages: [1] affy_1.19.4 preprocessCore_1.3.2 Biobase_2.1.7 [4] affyio_1.9.0 On Sat, 2008-07-19 at 19:24 -0700, Luo Weijun wrote: > Thanks, Henrik. > I load affyio package alone; read.celfile.header worked fine, but not read.celfile. I paste the session below. > Could Ben look at this issue? Please let me know if you need anything. Thanks a lot! > Weijun > > ? > > celFiles <- list.files(path='~/bmpEarly',pattern="[.](c|C)(e|E)(l| L)$",full.names=TRUE) > > header2<-read.celfile.header(celFiles) > > header2 > $cdfName > [1] "" > > $`CEL dimensions` > [1] -1945894912 -1945894912 > > > cel2<-read.celfile(celFiles) > > *** caught bus error *** > address 0x1285000, cause 'invalid alignment' > > Traceback: > 1: .Call("R_read_cel_file", filename, intensity.means.only, PACKAGE = "affyio") > 2: read.celfile(celFiles) > > Possible actions: > 1: abort (with core dump, if enabled) > 2: normal R exit > 3: exit R without saving workspace > 4: exit R saving workspace > R(27434) malloc: *** Deallocation of a pointer not malloced: 0x1129320; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment > variable MallocHelp to see tools to help debug > R(27434) malloc: *** Deallocation of a pointer not malloced: 0x112b500; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment > variable MallocHelp to see tools to help debug > Selection: 1 > aborting ... > Bus error > > > sessionInfo() > R version 2.7.1 (2008-06-23) > powerpc-apple-darwin8.10.1 > > locale: > C > > attached base packages: > [1] stats graphics grDevices utils datasets methods base > > other attached packages: > [1] affyio_1.8.0 > > > > > --- On Sat, 7/19/08, Henrik Bengtsson <hb at="" stat.berkeley.edu=""> wrote: > > > From: Henrik Bengtsson <hb at="" stat.berkeley.edu=""> > > Subject: Re: [BioC] ReadAffy crashes on mac > > To: luo_weijun at yahoo.com > > Cc: Bioconductor at stat.math.ethz.ch > > Date: Saturday, July 19, 2008, 9:27 PM > > Hi, > > > > The version 1 CEL file format is actually the most recent > > one from > > Affymetrix - it is a binary format known as the Calvin file > > format or > > the Command Console (CC) format. The old ASCII format is > > reported as > > version 3 and the binary (XDA) format is reported as > > version 4. > > > > ReadAffy of 'affy' utilized the 'affyio' > > package to read CEL files. I > > think that affyio supports the CC (v1) file format as well, > > but I > > can't bet on it. So for further troubleshooting I > > would recommend > > that start a fresh R session and only load 'affyio' > > and try its > > function to read the CEL files. Try with > > read.celfile.header(), > > read.celfile() and read.celfile.probeintensity.matrices() > > and see if > > they crash as well. That will help Ben Bolstad to > > troubleshoot > > affyio. > > > > If worse comes to worse, you can indeed convert the CEL > > files to v4 > > (binary; XDA) and the load it in. But, ideally you > > shouldn't have to > > convert files. Also, you should avoid working ASCII files > > - that's > > old school slow and memory consuming. > > > > My $1.02 > > > > /Henrik > > > > On Sat, Jul 19, 2008 at 5:43 PM, Luo Weijun > > <luo_weijun at="" yahoo.com=""> wrote: > > > Thanks a lot, Henrik, > > > I tried affxparser. Both readCelHeader() and readCel() > > worked well on either single or multiple CEL files. These > > binary CEL files. I think they should be version 4, but the > > readCelHeader read as version 1 (see the results). > > > I am wondering is there any way to create an AffyBatch > > object from the readCel() result object? I need to use > > special preprocessing method which takes AffyBatch as > > input. Or I may convert these CEL files to version 3 CEL > > format, where ReadAffy works fine. convertCel only writes > > version 4. > > > Weijun > > > > > > #header information > > >> header <- readCelHeader(celFile) > > >> header > > > $filename > > > [1] "~/bmpEarly/a1hr_6314.CEL" > > > > > > $version > > > [1] 1 > > > > > > $cols > > > [1] 1164 > > > > > > $rows > > > [1] 1164 > > > > > > $total > > > [1] 1354896 > > > > > > $algorithm > > > [1] "Feature Extraction Cell Generation" > > > ? > > > > > > > > > > > > --- On Sat, 7/19/08, Henrik Bengtsson > > <hb at="" stat.berkeley.edu=""> wrote: > > > > > >> From: Henrik Bengtsson > > <hb at="" stat.berkeley.edu=""> > > >> Subject: Re: [BioC] ReadAffy crashes on mac > > >> To: luo_weijun at yahoo.com > > >> Cc: Bioconductor at stat.math.ethz.ch > > >> Date: Saturday, July 19, 2008, 5:53 PM > > >> Hints for more troubleshooting: > > >> > > >> * Your example use two CEL files. Can you > > reproduce the > > >> error for a > > >> single CEL file? > > >> * What chip type? > > >> * Are these ASCII or binary CEL files? > > >> * Try to use affxparser to read the buggy CEL > > file, e.g. > > >> readCelHeader(), readCel() etc. Does that also > > give an > > >> error? > > >> > > >> Basically, can it be because the CEL file is > > corrupt? It > > >> should core > > >> dump, but it is a start. > > >> > > >> My $0.02 > > >> > > >> /Henrik > > >> > > >> > > >> On Sat, Jul 19, 2008 at 11:56 AM, Luo Weijun > > >> <luo_weijun at="" yahoo.com=""> wrote: > > >> > Dear all, > > >> > I use BioConductor affy package on a Mac OS X > > 10.4 > > >> machine, ReadAffy crashes R. The same problem has > > been > > >> reported earlier by another user (see > > >> > > http://thread.gmane.org/gmane.science.biology.informatics.conducto r/16747), > > >> but no solution has been suggested yet. > > >> > Here I show you the error message, session > > and debug > > >> information for R 2.7.1, but the same problem has > > been > > >> observed under R 2.6.0 (both 32 bit and 64 bit > > versions). > > >> > Please let me know if you have any > > >> ideas/comments/suggestions. Thanks a lot! > > >> > Weijun > > >> > > > >> > > > >> > > > >> > ##error message > > >> >> library(affy) > > >> > ... > > >> >> fns <- > > >> > > list.celfiles(path='/bmpEarly',full.names=TRUE) > > >> >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > > >> > > > >> > *** caught bus error *** > > >> > address 0x2008000, cause 'invalid > > alignment' > > >> > > > >> > *** caught segfault *** > > >> > address 0x40568008, cause 'memory not > > mapped' > > >> > > > >> > ##session > > >> >> sessionInfo() > > >> > R version 2.7.1 (2008-06-23) > > >> > powerpc-apple-darwin8.10.1 > > >> > > > >> > locale: > > >> > C > > >> > > > >> > attached base packages: > > >> > [1] tools stats graphics grDevices > > utils > > >> datasets methods > > >> > [8] base > > >> > > > >> > other attached packages: > > >> > [1] affy_1.18.2 preprocessCore_1.2.0 > > >> affyio_1.8.0 > > >> > [4] Biobase_2.0.1 > > >> > > > >> > > > >> > ##debug information > > >> > luow$ r -d gdb --vanilla > > >> > GNU gdb 6.1-20040303 (Apple version gdb-437) > > (Sun Dec > > >> 25 08:31:29 GMT 2005) > > >> > Copyright 2004 Free Software Foundation, Inc. > > >> > GDB is free software, covered by the GNU > > General > > >> Public License, and you are > > >> > welcome to change it and/or distribute copies > > of it > > >> under certain conditions. > > >> > Type "show copying" to see the > > conditions. > > >> > There is absolutely no warranty for GDB. > > Type > > >> "show warranty" for details. > > >> > This GDB was configured as > > >> "powerpc-apple-darwin"...unable to read > > unknown > > >> load command 0x1b > > >> > unable to read unknown load command 0x1b > > >> > unable to read unknown load command 0x1b > > >> > unable to read unknown load command 0x1b > > >> > bfd_mach_o_scan: unknown architecture > > 0x1000007/0x3 > > >> > Reading symbols for shared libraries ..... > > done > > >> > unable to read unknown load command 0x1b > > >> > > > >> > (gdb) run > > >> > Starting program: > > >> > > /Library/Frameworks/R.framework/Versions/2.7/Resources/bin/exec/ppc/R > > >> --vanilla > > >> > bfd_mach_o_scan: unknown architecture > > 0x1000007/0x3 > > >> > Reading symbols for shared libraries > > >> .......+...........+ done > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries . done > > >> > > > >> > R version 2.7.1 (2008-06-23) > > >> > Copyright (C) 2008 The R Foundation for > > Statistical > > >> Computing > > >> > ISBN 3-900051-07-0 > > >> > > > >> > Reading symbols for shared libraries . done > > >> > R is free software and comes with ABSOLUTELY > > NO > > >> WARRANTY. > > >> > You are welcome to redistribute it under > > certain > > >> conditions. > > >> > Type 'license()' or > > 'licence()' for > > >> distribution details. > > >> > > > >> > Natural language support but running in an > > English > > >> locale > > >> > > > >> > R is a collaborative project with many > > contributors. > > >> > Type 'contributors()' for more > > information and > > >> > 'citation()' on how to cite R or R > > packages in > > >> publications. > > >> > > > >> > Type 'demo()' for some demos, > > 'help()' > > >> for on-line help, or > > >> > 'help.start()' for an HTML browser > > interface > > >> to help. > > >> > Type 'q()' to quit R. > > >> > > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries > > >> > > ........................................................ > > >> done > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries . done > > >> >> library(affy) > > >> > Loading required package: Biobase > > >> > Loading required package: tools > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries . done > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries . done > > >> > > > >> > Welcome to Bioconductor > > >> > > > >> > Vignettes contain introductory material. To > > view, > > >> type > > >> > 'openVignette()'. To cite > > Bioconductor, see > > >> > 'citation("Biobase")' and > > for > > >> packages 'citation(pkgname)'. > > >> > > > >> > Loading required package: affyio > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries . done > > >> > Loading required package: preprocessCore > > >> > unable to read unknown load command 0x1b > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries .. done > > >> > unable to read unknown load command 0x1b > > >> > Reading symbols for shared libraries . done > > >> >> fns <- > > >> > > list.celfiles(path='/Users/luow/project/microarraydata/celfiles/Mi ke/bmpEarly',full.names=TRUE) > > >> >> hmscBmp<- ReadAffy(filenames=fns[1:2]) > > >> > Could not find OSO file: "" > > >> > (gdb) > > >> > > > >> > > > _______________________________________________ > > >> > Bioconductor mailing list > > >> > Bioconductor at stat.math.ethz.ch > > >> > > > https://stat.ethz.ch/mailman/listinfo/bioconductor > > >> > Search the archives: > > >> > > http://news.gmane.org/gmane.science.biology.informatics.conductor > > >> > > > > > > > > > > > > > > > > > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD REPLY •

Login before adding your answer.

Similar Posts
Loading Similar Posts
Traffic: 553 users visited in the last hour
Content Search
Users
Tags
Badges
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6