Create affyBatch from mouse exon array data using ReadAffy or extractAffyBatch() from aroma.affymetrix
1
0
Entering edit mode
@de-bondt-an-7114-prdbe-1572
Last seen 10.2 years ago
Dear UseRs, I am analysing a dataset from mouse exon arrays using aroma.affymetrix. I can read the raw data using following code. chipType <- "MmEx10stv1_Mm_ENSE" cdf <- AffymetrixCdfFile$fromChipType(chipType = chipType) # setup the CEL set; read the raw data #============== projectName <- "myDataSet" cs <- AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType=FALSE, cdf = cdf) Next, I would like to make an AffyBatch from these raw data but I stumble at a memory message (see below). This is the same message as directly affyBatchRaw <- ReadAffy(filenames = paste("./rawData/myDataSet/MmEx10stv1_Mm_ENSE/", celfiles, sep = "")) I am working on a linux machine with 70GB of memory. Did anyone experience this before? Is this typical for mouse exon arrays? I tried using exonmap as well as xps but, as far as I experienced, they are not yet adjusted for mouse exon arrays. Thanks in advance for your help! Kind regards, An >affyBatchRaw <- extractAffyBatch(cs) Error in read.affybatch(filenames = l$filenames, phenoData = l$phenoData, : Calloc could not allocate (-1889533886 of 48) memory > traceback() 5: .Call("read_abatch", filenames, rm.mask, rm.outliers, rm.extra, ref.cdfName, dim.intensity, verbose, PACKAGE = "affyio") 4: read.affybatch(filenames = l$filenames, phenoData = l$phenoData, description = l$description, notes = notes, compress = compress, rm.mask = rm.mask, rm.outliers = rm.outliers, rm.extra = rm.extra, verbose = verbose, sd = sd, cdfname = cdfname) 3: ReadAffy(filenames = filenames, sampleNames = sampleNames, ..., verbose = as.logical(verbose)) 2: extractAffyBatch.AffymetrixCelSet(cs) 1: extractAffyBatch(cs) >sessionInfo() R version 2.6.2 (2008-02-08) x86_64-unknown-linux-gnu locale: LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE=e n_US.UTF-8;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en _US.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.U TF-8;LC_IDENTIFICATION=C attached base packages: [1] tools stats graphics grDevices utils datasets methods [8] base other attached packages: [1] mmex10stv1mmensecdf_10.0.0 farms_1.3.1 [3] MASS_7.2-42 preprocessCore_1.0.0 [5] affyio_1.6.1 Biobase_1.16.3 [7] aroma.affymetrix_0.9.3 aroma.apd_0.1.3 [9] R.huge_0.1.5 affy_1.16.0 [11] affxparser_1.10.2 aroma.core_0.9.3 [13] sfit_0.1.5 aroma.light_1.8.1 [15] digest_0.3.1 matrixStats_0.1.2 [17] R.rsp_0.3.4 R.cache_0.1.7 [19] R.utils_1.0.2 R.oo_1.4.3 [21] R.methodsS3_1.0.1 loaded via a namespace (and not attached): [1] rcompgen_0.1-17 [[alternative HTML version deleted]]
cdf exonmap xps cdf exonmap xps • 1.8k views
ADD COMMENT
0
Entering edit mode
cstrato ★ 3.9k
@cstrato-908
Last seen 6.1 years ago
Austria
Dear An I cannot answer your question regarding aroma.affymetrix, but since you also mention "xps": Please note that xps can handle mouse exon arrays, see the file "script4xps.R" in directory examples of how to import the necessary clf, pgf and annotation files. Please let me know if you experience any problems. Best regards Christian _._._._._._._._._._._._._._._._ C.h.i.s.t.i.a.n S.t.r.a.t.o.w.a V.i.e.n.n.a A.u.s.t.r.i.a e.m.a.i.l: cstrato at aon.at _._._._._._._._._._._._._._._._ De Bondt, An-7114 [PRDBE] wrote: > Dear UseRs, > > I am analysing a dataset from mouse exon arrays using aroma.affymetrix. I can read the raw data using following code. > > chipType <- "MmEx10stv1_Mm_ENSE" > cdf <- AffymetrixCdfFile$fromChipType(chipType = chipType) > > # setup the CEL set; read the raw data > #============== > projectName <- "myDataSet" > cs <- AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType=FALSE, cdf = cdf) > > > > Next, I would like to make an AffyBatch from these raw data but I stumble at a memory message (see below). This is the same message as directly > affyBatchRaw <- ReadAffy(filenames = paste("./rawData/myDataSet/MmEx10stv1_Mm_ENSE/", celfiles, sep = "")) > > I am working on a linux machine with 70GB of memory. > > > Did anyone experience this before? Is this typical for mouse exon arrays? > I tried using exonmap as well as xps but, as far as I experienced, they are not yet adjusted for mouse exon arrays. > > Thanks in advance for your help! > > Kind regards, > An > > > > >> affyBatchRaw <- extractAffyBatch(cs) >> > Error in read.affybatch(filenames = l$filenames, phenoData = l$phenoData, : > Calloc could not allocate (-1889533886 of 48) memory > > >> traceback() >> > 5: .Call("read_abatch", filenames, rm.mask, rm.outliers, rm.extra, > ref.cdfName, dim.intensity, verbose, PACKAGE = "affyio") > 4: read.affybatch(filenames = l$filenames, phenoData = l$phenoData, > description = l$description, notes = notes, compress = compress, > rm.mask = rm.mask, rm.outliers = rm.outliers, rm.extra = rm.extra, > verbose = verbose, sd = sd, cdfname = cdfname) > 3: ReadAffy(filenames = filenames, sampleNames = sampleNames, ..., > verbose = as.logical(verbose)) > 2: extractAffyBatch.AffymetrixCelSet(cs) > 1: extractAffyBatch(cs) > > >> sessionInfo() >> > R version 2.6.2 (2008-02-08) > x86_64-unknown-linux-gnu > > locale: > LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE =en_US.UTF-8;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER= en_US.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US .UTF-8;LC_IDENTIFICATION=C > > attached base packages: > [1] tools stats graphics grDevices utils datasets methods > [8] base > > other attached packages: > [1] mmex10stv1mmensecdf_10.0.0 farms_1.3.1 > [3] MASS_7.2-42 preprocessCore_1.0.0 > [5] affyio_1.6.1 Biobase_1.16.3 > [7] aroma.affymetrix_0.9.3 aroma.apd_0.1.3 > [9] R.huge_0.1.5 affy_1.16.0 > [11] affxparser_1.10.2 aroma.core_0.9.3 > [13] sfit_0.1.5 aroma.light_1.8.1 > [15] digest_0.3.1 matrixStats_0.1.2 > [17] R.rsp_0.3.4 R.cache_0.1.7 > [19] R.utils_1.0.2 R.oo_1.4.3 > [21] R.methodsS3_1.0.1 > > loaded via a namespace (and not attached): > [1] rcompgen_0.1-17 > > > > > [[alternative HTML version deleted]] > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor > > >
ADD COMMENT
0
Entering edit mode
Hi, I never received the original message for this one - was it posted to BioC? Anyway, my comments below. On Wed, Jul 16, 2008 at 11:59 AM, cstrato <cstrato at="" aon.at=""> wrote: > Dear An > > I cannot answer your question regarding aroma.affymetrix, > but since you also mention "xps": > > Please note that xps can handle mouse exon arrays, > see the file "script4xps.R" in directory examples of how > to import the necessary clf, pgf and annotation files. > > Please let me know if you experience any problems. > > Best regards > Christian > _._._._._._._._._._._._._._._._ > C.h.i.s.t.i.a.n S.t.r.a.t.o.w.a > V.i.e.n.n.a A.u.s.t.r.i.a > e.m.a.i.l: cstrato at aon.at > _._._._._._._._._._._._._._._._ > > De Bondt, An-7114 [PRDBE] wrote: >> >> Dear UseRs, >> >> I am analysing a dataset from mouse exon arrays using aroma.affymetrix. I >> can read the raw data using following code. >> >> chipType <- "MmEx10stv1_Mm_ENSE" >> cdf <- AffymetrixCdfFile$fromChipType(chipType = chipType) >> # setup the CEL set; read the raw data >> #============== >> projectName <- "myDataSet" >> cs <- AffymetrixCelSet$byName(projectName, chipType = chipType, >> checkChipType=FALSE, cdf = cdf) Actually, that is not doing anything but setting up the AffymetrixCelSet. It does not read in the data, except validating that the CEL files are consistent with each other (and the CDF). BTW, you should only use 'checkChipType=FALSE', if you really know what you are doing; if it gives an error otherwise, there is often a good reason for it. >> >> >> Next, I would like to make an AffyBatch from these raw data but I stumble >> at a memory message (see below). This is the same message as directly >> affyBatchRaw <- ReadAffy(filenames = >> paste("./rawData/myDataSet/MmEx10stv1_Mm_ENSE/", celfiles, sep = "")) I see that you previously/below tried: affyBatchRaw <- extractAffyBatch(cs) which is pretty much the same as the above. In aroma.affymetrix we use prefix "extract..." on method names to make it explicit that you load all data into memory and that any changes done on the obtained object will *not* be reflected in the underlying data files. Having said all this, what you do above is not really utilizing the aroma.affymetrix package at all. All your problems are unrelated to that package and has to do with the 'affy' package. Your alternative is to do your exon analysis in 'aroma.affymetrix' (see online Vignettes), or use 'xps' as Christian suggests. Cheers Henrik >> >> I am working on a linux machine with 70GB of memory. >> >> >> Did anyone experience this before? Is this typical for mouse exon arrays? >> I tried using exonmap as well as xps but, as far as I experienced, they are >> not yet adjusted for mouse exon arrays. >> >> Thanks in advance for your help! >> >> Kind regards, >> An >> >> >> >> >>> >>> affyBatchRaw <- extractAffyBatch(cs) >>> >> >> Error in read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >> : Calloc could not allocate (-1889533886 of 48) memory >> >> >>> >>> traceback() >>> >> >> 5: .Call("read_abatch", filenames, rm.mask, rm.outliers, rm.extra, >> ref.cdfName, dim.intensity, verbose, PACKAGE = "affyio") >> 4: read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >> description = l$description, notes = notes, compress = compress, rm.mask >> = rm.mask, rm.outliers = rm.outliers, rm.extra = rm.extra, verbose = >> verbose, sd = sd, cdfname = cdfname) >> 3: ReadAffy(filenames = filenames, sampleNames = sampleNames, ..., >> verbose = as.logical(verbose)) >> 2: extractAffyBatch.AffymetrixCelSet(cs) >> 1: extractAffyBatch(cs) >> >> >>> >>> sessionInfo() >>> >> >> R version 2.6.2 (2008-02-08) x86_64-unknown-linux-gnu >> locale: >> >> LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE=e n_US.UTF-8;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en _US.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.U TF-8;LC_IDENTIFICATION=C >> >> attached base packages: >> [1] tools stats graphics grDevices utils datasets methods >> [8] base >> other attached packages: >> [1] mmex10stv1mmensecdf_10.0.0 farms_1.3.1 [3] >> MASS_7.2-42 preprocessCore_1.0.0 [5] affyio_1.6.1 >> Biobase_1.16.3 [7] aroma.affymetrix_0.9.3 >> aroma.apd_0.1.3 [9] R.huge_0.1.5 affy_1.16.0 >> [11] affxparser_1.10.2 aroma.core_0.9.3 [13] >> sfit_0.1.5 aroma.light_1.8.1 [15] digest_0.3.1 >> matrixStats_0.1.2 [17] R.rsp_0.3.4 >> R.cache_0.1.7 [19] R.utils_1.0.2 R.oo_1.4.3 >> [21] R.methodsS3_1.0.1 >> loaded via a namespace (and not attached): >> [1] rcompgen_0.1-17 >> >> >> >> >> [[alternative HTML version deleted]] >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor >> >> >> > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor >
ADD REPLY
0
Entering edit mode
Thanks, Christian and Henrik, for your feedback! With respect to setting up the AffymetrixCelSet in aroma.affymetrix, I used checkChipType=FALSE because of the use of the alternative chipType (MmEx10stv1_Mm_ENSE in stead of MoEx-1_0-st-v1). If I use checkChipType=TRUE in this setup, I get the following: Error in list("AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType = T" = <environment>, : [2008-07-17 08:25:21] Exception: Invalid name of directory containing CEL files. The name of the directory (MmEx10stv1_Mm_ENSE) must be the same as the chip type used for the CEL files (MoEx-1_0-st-v1) unless using argument 'checkChipType=FALSE': rawData/myDataSet/MmEx10stv1_Mm_ENSE at throw(Exception(...)) at throw.default("Invalid name of directory containing CEL files. The name of at throw("Invalid name of directory containing CEL files. The name of the dire at fromFiles.AffymetrixCelSet(static, path = path, cdf = cdf, ...) at fromFiles(static, path = path, cdf = cdf, ...) at withCallingHandlers(expr, warning = function(w) invokeRestart("muffleWarnin at suppressWarnings({ at method(static, ...) at AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType = T With respect to xps, your reference to script4xps.R is really helpful. Do you have a URL from where the files "MoEx-1_0-st-v1.r2.clf", "MoEx- 1_0-st-v1.r2.pgf", "MoEx-1_0-st-v1.na25.mm9.probeset.csv", "MoEx- 1_0-st-v1.na25.mm9.transcript.csv" can be downloaded? I searched on the Affy site but did not find it, sorry. Does xps work with AffyBatches? If not, is it possible to create an AffyBatch with the raw data? Best, An -----Original Message----- From: henrik.bengtsson@gmail.com [mailto:henrik.bengtsson@gmail.com]On Behalf Of Henrik Bengtsson Sent: Wednesday, 16 July 2008 21:48 To: cstrato Cc: De Bondt, An-7114 [PRDBE]; bioconductor at stat.math.ethz.ch Subject: Re: [BioC] Create affyBatch from mouse exon array data using ReadAffy or extractAffyBatch() from aroma.affymetrix Hi, I never received the original message for this one - was it posted to BioC? Anyway, my comments below. On Wed, Jul 16, 2008 at 11:59 AM, cstrato <cstrato at="" aon.at=""> wrote: > Dear An > > I cannot answer your question regarding aroma.affymetrix, > but since you also mention "xps": > > Please note that xps can handle mouse exon arrays, > see the file "script4xps.R" in directory examples of how > to import the necessary clf, pgf and annotation files. > > Please let me know if you experience any problems. > > Best regards > Christian > _._._._._._._._._._._._._._._._ > C.h.i.s.t.i.a.n S.t.r.a.t.o.w.a > V.i.e.n.n.a A.u.s.t.r.i.a > e.m.a.i.l: cstrato at aon.at > _._._._._._._._._._._._._._._._ > > De Bondt, An-7114 [PRDBE] wrote: >> >> Dear UseRs, >> >> I am analysing a dataset from mouse exon arrays using aroma.affymetrix. I >> can read the raw data using following code. >> >> chipType <- "MmEx10stv1_Mm_ENSE" >> cdf <- AffymetrixCdfFile$fromChipType(chipType = chipType) >> # setup the CEL set; read the raw data >> #============== >> projectName <- "myDataSet" >> cs <- AffymetrixCelSet$byName(projectName, chipType = chipType, >> checkChipType=FALSE, cdf = cdf) Actually, that is not doing anything but setting up the AffymetrixCelSet. It does not read in the data, except validating that the CEL files are consistent with each other (and the CDF). BTW, you should only use 'checkChipType=FALSE', if you really know what you are doing; if it gives an error otherwise, there is often a good reason for it. >> >> >> Next, I would like to make an AffyBatch from these raw data but I stumble >> at a memory message (see below). This is the same message as directly >> affyBatchRaw <- ReadAffy(filenames = >> paste("./rawData/myDataSet/MmEx10stv1_Mm_ENSE/", celfiles, sep = "")) I see that you previously/below tried: affyBatchRaw <- extractAffyBatch(cs) which is pretty much the same as the above. In aroma.affymetrix we use prefix "extract..." on method names to make it explicit that you load all data into memory and that any changes done on the obtained object will *not* be reflected in the underlying data files. Having said all this, what you do above is not really utilizing the aroma.affymetrix package at all. All your problems are unrelated to that package and has to do with the 'affy' package. Your alternative is to do your exon analysis in 'aroma.affymetrix' (see online Vignettes), or use 'xps' as Christian suggests. Cheers Henrik >> >> I am working on a linux machine with 70GB of memory. >> >> >> Did anyone experience this before? Is this typical for mouse exon arrays? >> I tried using exonmap as well as xps but, as far as I experienced, they are >> not yet adjusted for mouse exon arrays. >> >> Thanks in advance for your help! >> >> Kind regards, >> An >> >> >> >> >>> >>> affyBatchRaw <- extractAffyBatch(cs) >>> >> >> Error in read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >> : Calloc could not allocate (-1889533886 of 48) memory >> >> >>> >>> traceback() >>> >> >> 5: .Call("read_abatch", filenames, rm.mask, rm.outliers, rm.extra, >> ref.cdfName, dim.intensity, verbose, PACKAGE = "affyio") >> 4: read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >> description = l$description, notes = notes, compress = compress, rm.mask >> = rm.mask, rm.outliers = rm.outliers, rm.extra = rm.extra, verbose = >> verbose, sd = sd, cdfname = cdfname) >> 3: ReadAffy(filenames = filenames, sampleNames = sampleNames, ..., >> verbose = as.logical(verbose)) >> 2: extractAffyBatch.AffymetrixCelSet(cs) >> 1: extractAffyBatch(cs) >> >> >>> >>> sessionInfo() >>> >> >> R version 2.6.2 (2008-02-08) x86_64-unknown-linux-gnu >> locale: >> >> LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE=e n_US.UTF-8;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en _US.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.U TF-8;LC_IDENTIFICATION=C >> >> attached base packages: >> [1] tools stats graphics grDevices utils datasets methods >> [8] base >> other attached packages: >> [1] mmex10stv1mmensecdf_10.0.0 farms_1.3.1 [3] >> MASS_7.2-42 preprocessCore_1.0.0 [5] affyio_1.6.1 >> Biobase_1.16.3 [7] aroma.affymetrix_0.9.3 >> aroma.apd_0.1.3 [9] R.huge_0.1.5 affy_1.16.0 >> [11] affxparser_1.10.2 aroma.core_0.9.3 [13] >> sfit_0.1.5 aroma.light_1.8.1 [15] digest_0.3.1 >> matrixStats_0.1.2 [17] R.rsp_0.3.4 >> R.cache_0.1.7 [19] R.utils_1.0.2 R.oo_1.4.3 >> [21] R.methodsS3_1.0.1 >> loaded via a namespace (and not attached): >> [1] rcompgen_0.1-17 >> >> >> >> >> [[alternative HTML version deleted]] >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor >> >> >> > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor >
ADD REPLY
0
Entering edit mode
Hi. On Thu, Jul 17, 2008 at 12:33 AM, De Bondt, An-7114 [PRDBE] <adbondt at="" prdbe.jnj.com=""> wrote: > > Thanks, Christian and Henrik, for your feedback! > > > With respect to setting up the AffymetrixCelSet in aroma.affymetrix, I used checkChipType=FALSE because of the use of the alternative chipType (MmEx10stv1_Mm_ENSE in stead of MoEx-1_0-st-v1). If I use checkChipType=TRUE in this setup, I get the following: > > Error in list("AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType = T" = <environment>, : > > [2008-07-17 08:25:21] Exception: Invalid name of directory containing CEL files. The name of the directory (MmEx10stv1_Mm_ENSE) must be the same as the chip type used for the CEL files (MoEx- 1_0-st-v1) unless using argument 'checkChipType=FALSE': rawData/myDataSet/MmEx10stv1_Mm_ENSE > at throw(Exception(...)) > at throw.default("Invalid name of directory containing CEL files. The name of > at throw("Invalid name of directory containing CEL files. The name of the dire > at fromFiles.AffymetrixCelSet(static, path = path, cdf = cdf, ...) > at fromFiles(static, path = path, cdf = cdf, ...) > at withCallingHandlers(expr, warning = function(w) invokeRestart("muffleWarnin > at suppressWarnings({ > at method(static, ...) > at AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType = T > Just for your information, a cleaner way to do this is illustrated in Vignette 'Human exon array analysis' [http://groups.google.com/group/aroma-affymetrix/web/human-exon-array- analysis]; cdf <- AffymetrixCdfFile$fromChipType("MmEx10stv1_Mm_ENSE"); cs <- AffymetrixCelSet$fromName("myDataSet", cdf=cdf); I also strongly recommend to use more informative data set names than 'myDataSet'. > > > With respect to xps, your reference to script4xps.R is really helpful. Do you have a URL from where the files "MoEx- 1_0-st-v1.r2.clf", "MoEx-1_0-st-v1.r2.pgf", "MoEx- 1_0-st-v1.na25.mm9.probeset.csv", "MoEx- 1_0-st-v1.na25.mm9.transcript.csv" can be downloaded? I searched on the Affy site but did not find it, sorry. I just want to follow up on Mark R links; We're trying to collect information with summaries and links on various Affymetrix chip types in one place: http://groups.google.com/group/aroma-affymetrix/web/documentation-on- chip-types If you want to have a chip type or additional information added, please forward it to the aroma.affymetrix mailing list. FYI, you find most annotation data files under the pages Affymetrix call 'Support Material' and the CDF is always in the "library files". Cheers Henrik > Does xps work with AffyBatches? If not, is it possible to create an AffyBatch with the raw data? > > > > Best, > An > > > > -----Original Message----- > From: henrik.bengtsson at gmail.com [mailto:henrik.bengtsson at gmail.com]On > Behalf Of Henrik Bengtsson > Sent: Wednesday, 16 July 2008 21:48 > To: cstrato > Cc: De Bondt, An-7114 [PRDBE]; bioconductor at stat.math.ethz.ch > Subject: Re: [BioC] Create affyBatch from mouse exon array data using > ReadAffy or extractAffyBatch() from aroma.affymetrix > > > Hi, > > I never received the original message for this one - was it posted to > BioC? Anyway, my comments below. > > On Wed, Jul 16, 2008 at 11:59 AM, cstrato <cstrato at="" aon.at=""> wrote: >> Dear An >> >> I cannot answer your question regarding aroma.affymetrix, >> but since you also mention "xps": >> >> Please note that xps can handle mouse exon arrays, >> see the file "script4xps.R" in directory examples of how >> to import the necessary clf, pgf and annotation files. >> >> Please let me know if you experience any problems. >> >> Best regards >> Christian >> _._._._._._._._._._._._._._._._ >> C.h.i.s.t.i.a.n S.t.r.a.t.o.w.a >> V.i.e.n.n.a A.u.s.t.r.i.a >> e.m.a.i.l: cstrato at aon.at >> _._._._._._._._._._._._._._._._ >> >> De Bondt, An-7114 [PRDBE] wrote: >>> >>> Dear UseRs, >>> >>> I am analysing a dataset from mouse exon arrays using aroma.affymetrix. I >>> can read the raw data using following code. >>> >>> chipType <- "MmEx10stv1_Mm_ENSE" >>> cdf <- AffymetrixCdfFile$fromChipType(chipType = chipType) >>> # setup the CEL set; read the raw data >>> #============== >>> projectName <- "myDataSet" >>> cs <- AffymetrixCelSet$byName(projectName, chipType = chipType, >>> checkChipType=FALSE, cdf = cdf) > > Actually, that is not doing anything but setting up the > AffymetrixCelSet. It does not read in the data, except validating > that the CEL files are consistent with each other (and the CDF). BTW, > you should only use 'checkChipType=FALSE', if you really know what you > are doing; if it gives an error otherwise, there is often a good > reason for it. > >>> >>> >>> Next, I would like to make an AffyBatch from these raw data but I stumble >>> at a memory message (see below). This is the same message as directly >>> affyBatchRaw <- ReadAffy(filenames = >>> paste("./rawData/myDataSet/MmEx10stv1_Mm_ENSE/", celfiles, sep = "")) > > I see that you previously/below tried: > > affyBatchRaw <- extractAffyBatch(cs) > > which is pretty much the same as the above. In aroma.affymetrix we > use prefix "extract..." on method names to make it explicit that you > load all data into memory and that any changes done on the obtained > object will *not* be reflected in the underlying data files. > > Having said all this, what you do above is not really utilizing the > aroma.affymetrix package at all. All your problems are unrelated to > that package and has to do with the 'affy' package. > > Your alternative is to do your exon analysis in 'aroma.affymetrix' > (see online Vignettes), or use 'xps' as Christian suggests. > > Cheers > > Henrik > >>> >>> I am working on a linux machine with 70GB of memory. >>> >>> >>> Did anyone experience this before? Is this typical for mouse exon arrays? >>> I tried using exonmap as well as xps but, as far as I experienced, they are >>> not yet adjusted for mouse exon arrays. >>> >>> Thanks in advance for your help! >>> >>> Kind regards, >>> An >>> >>> >>> >>> >>>> >>>> affyBatchRaw <- extractAffyBatch(cs) >>>> >>> >>> Error in read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >>> : Calloc could not allocate (-1889533886 of 48) memory >>> >>> >>>> >>>> traceback() >>>> >>> >>> 5: .Call("read_abatch", filenames, rm.mask, rm.outliers, rm.extra, >>> ref.cdfName, dim.intensity, verbose, PACKAGE = "affyio") >>> 4: read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >>> description = l$description, notes = notes, compress = compress, rm.mask >>> = rm.mask, rm.outliers = rm.outliers, rm.extra = rm.extra, verbose = >>> verbose, sd = sd, cdfname = cdfname) >>> 3: ReadAffy(filenames = filenames, sampleNames = sampleNames, ..., >>> verbose = as.logical(verbose)) >>> 2: extractAffyBatch.AffymetrixCelSet(cs) >>> 1: extractAffyBatch(cs) >>> >>> >>>> >>>> sessionInfo() >>>> >>> >>> R version 2.6.2 (2008-02-08) x86_64-unknown-linux-gnu >>> locale: >>> >>> LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE= en_US.UTF-8;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=e n_US.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US. UTF-8;LC_IDENTIFICATION=C >>> >>> attached base packages: >>> [1] tools stats graphics grDevices utils datasets methods >>> [8] base >>> other attached packages: >>> [1] mmex10stv1mmensecdf_10.0.0 farms_1.3.1 [3] >>> MASS_7.2-42 preprocessCore_1.0.0 [5] affyio_1.6.1 >>> Biobase_1.16.3 [7] aroma.affymetrix_0.9.3 >>> aroma.apd_0.1.3 [9] R.huge_0.1.5 affy_1.16.0 >>> [11] affxparser_1.10.2 aroma.core_0.9.3 [13] >>> sfit_0.1.5 aroma.light_1.8.1 [15] digest_0.3.1 >>> matrixStats_0.1.2 [17] R.rsp_0.3.4 >>> R.cache_0.1.7 [19] R.utils_1.0.2 R.oo_1.4.3 >>> [21] R.methodsS3_1.0.1 >>> loaded via a namespace (and not attached): >>> [1] rcompgen_0.1-17 >>> >>> >>> >>> >>> [[alternative HTML version deleted]] >>> >>> _______________________________________________ >>> Bioconductor mailing list >>> Bioconductor at stat.math.ethz.ch >>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>> Search the archives: >>> http://news.gmane.org/gmane.science.biology.informatics.conductor >>> >>> >>> >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor >> > >
ADD REPLY
0
Entering edit mode
Hi An. > With respect to xps, your reference to script4xps.R is really > helpful. Do you have a URL from where the files "MoEx-1_0-st- > v1.r2.clf", "MoEx-1_0-st-v1.r2.pgf", "MoEx-1_0-st- > v1.na25.mm9.probeset.csv", "MoEx-1_0-st-v1.na25.mm9.transcript.csv" > can be downloaded? I searched on the Affy site but did not find it, > sorry. To answer this part of your question, you can get the probeset.csv file from: http://www.affymetrix.com/analysis/downloads/current_exon/ The PGF/CLF can be found at: http://www.affymetrix.com/support/technical/libraryfilesmain.affx Look for "Mouse Exon 1.0 ST Array Analysis (zip, 114 MB)", which after logging in, will get you: MoEx-1_0-st-v1.r2.zip There are plans to make a couple versions of Mouse CDFs for use with FIRMA within aroma.affymetrix. I'm not sure when that will actually be, but hopefully "soon". > Does xps work with AffyBatches? If not, is it possible to create an > AffyBatch with the raw data? xps, from my limited experience with, does not deal directly with AffyBatch objects, but maybe you can export one. Cheers, Mark ------------------------------ Mark Robinson Epigenetics Laboratory, Garvan Bioinformatics Division, WEHI e: m.robinson at garvan.org.au e: mrobinson at wehi.edu.au p: +61 (0)3 9345 2628 f: +61 (0)3 9347 0852
ADD REPLY
0
Entering edit mode
Dear An Mark was already so kind to answer your URL question. Here is another link especially for mouse exon arrays: http://www.affymetrix.com/support/technical/byproduct.affx?product =moexon-st This link contains all files you need to download, as well as links to the Affymetrix exon array dataset. Besides the file ""script4xps.R" directory examples has another file, namely "script4exon.R", which uses the Affymetrix human exon array dataset as an example how to use xps with gene arrays and exon arrays. Regarding your question, whether xps works with AffyBatches: No, it has its own S4 class "DataTreeSet", which can be considered to be a substitute for AffyBatch, since it includes many methods also found in AffyBatch, e.g. exprs, se.exprs, pm, mm. For exon arrays, it is not possible to create an AffyBatch, since it requires cdfName, and xps uses pgf-files instead. Furthermore, AffyBatch has the problem that ReadAffy() imports the data from all CEL-files, which requires lots of RAM when importing many exon arrays. Class DataTreeSet does not suffer this problem, thus you can import many exon arrays on PCs with 1GB RAM only. It is not quite clear to me, why you want to create an AffyBatch, since usually you use the normalized data for further processing. The normalized expression data are often saved as class ExpressionSet, which you can easily create, as described in Appendix A.3 of vignette "xps.pdf". Please let me know if you have further questions. Best regards Christian De Bondt, An-7114 [PRDBE] wrote: > Thanks, Christian and Henrik, for your feedback! > > > With respect to setting up the AffymetrixCelSet in aroma.affymetrix, I used checkChipType=FALSE because of the use of the alternative chipType (MmEx10stv1_Mm_ENSE in stead of MoEx-1_0-st-v1). If I use checkChipType=TRUE in this setup, I get the following: > > Error in list("AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType = T" = <environment>, : > > [2008-07-17 08:25:21] Exception: Invalid name of directory containing CEL files. The name of the directory (MmEx10stv1_Mm_ENSE) must be the same as the chip type used for the CEL files (MoEx- 1_0-st-v1) unless using argument 'checkChipType=FALSE': rawData/myDataSet/MmEx10stv1_Mm_ENSE > at throw(Exception(...)) > at throw.default("Invalid name of directory containing CEL files. The name of > at throw("Invalid name of directory containing CEL files. The name of the dire > at fromFiles.AffymetrixCelSet(static, path = path, cdf = cdf, ...) > at fromFiles(static, path = path, cdf = cdf, ...) > at withCallingHandlers(expr, warning = function(w) invokeRestart("muffleWarnin > at suppressWarnings({ > at method(static, ...) > at AffymetrixCelSet$byName(projectName, chipType = chipType, checkChipType = T > > > > With respect to xps, your reference to script4xps.R is really helpful. Do you have a URL from where the files "MoEx- 1_0-st-v1.r2.clf", "MoEx-1_0-st-v1.r2.pgf", "MoEx- 1_0-st-v1.na25.mm9.probeset.csv", "MoEx- 1_0-st-v1.na25.mm9.transcript.csv" can be downloaded? I searched on the Affy site but did not find it, sorry. > Does xps work with AffyBatches? If not, is it possible to create an AffyBatch with the raw data? > > > > Best, > An > > > > -----Original Message----- > From: henrik.bengtsson at gmail.com [mailto:henrik.bengtsson at gmail.com]On > Behalf Of Henrik Bengtsson > Sent: Wednesday, 16 July 2008 21:48 > To: cstrato > Cc: De Bondt, An-7114 [PRDBE]; bioconductor at stat.math.ethz.ch > Subject: Re: [BioC] Create affyBatch from mouse exon array data using > ReadAffy or extractAffyBatch() from aroma.affymetrix > > > Hi, > > I never received the original message for this one - was it posted to > BioC? Anyway, my comments below. > > On Wed, Jul 16, 2008 at 11:59 AM, cstrato <cstrato at="" aon.at=""> wrote: > >> Dear An >> >> I cannot answer your question regarding aroma.affymetrix, >> but since you also mention "xps": >> >> Please note that xps can handle mouse exon arrays, >> see the file "script4xps.R" in directory examples of how >> to import the necessary clf, pgf and annotation files. >> >> Please let me know if you experience any problems. >> >> Best regards >> Christian >> _._._._._._._._._._._._._._._._ >> C.h.i.s.t.i.a.n S.t.r.a.t.o.w.a >> V.i.e.n.n.a A.u.s.t.r.i.a >> e.m.a.i.l: cstrato at aon.at >> _._._._._._._._._._._._._._._._ >> >> De Bondt, An-7114 [PRDBE] wrote: >> >>> Dear UseRs, >>> >>> I am analysing a dataset from mouse exon arrays using aroma.affymetrix. I >>> can read the raw data using following code. >>> >>> chipType <- "MmEx10stv1_Mm_ENSE" >>> cdf <- AffymetrixCdfFile$fromChipType(chipType = chipType) >>> # setup the CEL set; read the raw data >>> #============== >>> projectName <- "myDataSet" >>> cs <- AffymetrixCelSet$byName(projectName, chipType = chipType, >>> checkChipType=FALSE, cdf = cdf) >>> > > Actually, that is not doing anything but setting up the > AffymetrixCelSet. It does not read in the data, except validating > that the CEL files are consistent with each other (and the CDF). BTW, > you should only use 'checkChipType=FALSE', if you really know what you > are doing; if it gives an error otherwise, there is often a good > reason for it. > > >>> Next, I would like to make an AffyBatch from these raw data but I stumble >>> at a memory message (see below). This is the same message as directly >>> affyBatchRaw <- ReadAffy(filenames = >>> paste("./rawData/myDataSet/MmEx10stv1_Mm_ENSE/", celfiles, sep = "")) >>> > > I see that you previously/below tried: > > affyBatchRaw <- extractAffyBatch(cs) > > which is pretty much the same as the above. In aroma.affymetrix we > use prefix "extract..." on method names to make it explicit that you > load all data into memory and that any changes done on the obtained > object will *not* be reflected in the underlying data files. > > Having said all this, what you do above is not really utilizing the > aroma.affymetrix package at all. All your problems are unrelated to > that package and has to do with the 'affy' package. > > Your alternative is to do your exon analysis in 'aroma.affymetrix' > (see online Vignettes), or use 'xps' as Christian suggests. > > Cheers > > Henrik > > >>> I am working on a linux machine with 70GB of memory. >>> >>> >>> Did anyone experience this before? Is this typical for mouse exon arrays? >>> I tried using exonmap as well as xps but, as far as I experienced, they are >>> not yet adjusted for mouse exon arrays. >>> >>> Thanks in advance for your help! >>> >>> Kind regards, >>> An >>> >>> >>> >>> >>> >>>> affyBatchRaw <- extractAffyBatch(cs) >>>> >>>> >>> Error in read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >>> : Calloc could not allocate (-1889533886 of 48) memory >>> >>> >>> >>>> traceback() >>>> >>>> >>> 5: .Call("read_abatch", filenames, rm.mask, rm.outliers, rm.extra, >>> ref.cdfName, dim.intensity, verbose, PACKAGE = "affyio") >>> 4: read.affybatch(filenames = l$filenames, phenoData = l$phenoData, >>> description = l$description, notes = notes, compress = compress, rm.mask >>> = rm.mask, rm.outliers = rm.outliers, rm.extra = rm.extra, verbose = >>> verbose, sd = sd, cdfname = cdfname) >>> 3: ReadAffy(filenames = filenames, sampleNames = sampleNames, ..., >>> verbose = as.logical(verbose)) >>> 2: extractAffyBatch.AffymetrixCelSet(cs) >>> 1: extractAffyBatch(cs) >>> >>> >>> >>>> sessionInfo() >>>> >>>> >>> R version 2.6.2 (2008-02-08) x86_64-unknown-linux-gnu >>> locale: >>> >>> LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE= en_US.UTF-8;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=e n_US.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US. UTF-8;LC_IDENTIFICATION=C >>> >>> attached base packages: >>> [1] tools stats graphics grDevices utils datasets methods >>> [8] base >>> other attached packages: >>> [1] mmex10stv1mmensecdf_10.0.0 farms_1.3.1 [3] >>> MASS_7.2-42 preprocessCore_1.0.0 [5] affyio_1.6.1 >>> Biobase_1.16.3 [7] aroma.affymetrix_0.9.3 >>> aroma.apd_0.1.3 [9] R.huge_0.1.5 affy_1.16.0 >>> [11] affxparser_1.10.2 aroma.core_0.9.3 [13] >>> sfit_0.1.5 aroma.light_1.8.1 [15] digest_0.3.1 >>> matrixStats_0.1.2 [17] R.rsp_0.3.4 >>> R.cache_0.1.7 [19] R.utils_1.0.2 R.oo_1.4.3 >>> [21] R.methodsS3_1.0.1 >>> loaded via a namespace (and not attached): >>> [1] rcompgen_0.1-17 >>> >>> >>> >>> >>> [[alternative HTML version deleted]] >>> >>> _______________________________________________ >>> Bioconductor mailing list >>> Bioconductor at stat.math.ethz.ch >>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>> Search the archives: >>> http://news.gmane.org/gmane.science.biology.informatics.conductor >>> >>> >>> >>> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor >> >> > > > >
ADD REPLY

Login before adding your answer.

Traffic: 931 users visited in the last hour
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6