oligo and pd.genomewidesnp.6_0
2
0
Entering edit mode
@morten-mattingsdal-1907
Last seen 10.2 years ago
Hi, Ive just intstalled a fresh version of R 2.7.0 and want to run CRLMM on ~780 Affymetrix chips. When installing the subsequent platform design "pd.genomewidesnp.6_0" I get the following errors: R CMD INSTALL pd.genomewidesnp.6_0.4.2.tar.gz tar: pd.genomewidesnp.6/inst/extdata/pd.genomewidesnp.6.sqlite: Wrote only 1024 of 10240 bytes tar: Skipping to next header tar: Archive contains obsolescent base-64 headers tar: pd.genomewidesnp.6/inst/UnitTests: Cannot mkdir: No space left on device tar: pd.genomewidesnp.6/inst/UnitTests/crlmm_test.R: Cannot open: No such file or directory tar: pd.genomewidesnp.6/inst/UnitTests/runfile.sh: Cannot open: No such file or directory tar: pd.genomewidesnp.6/inst/UnitTests/Makefile: Cannot open: No such file or directory tar: pd.genomewidesnp.6/inst/UnitTests/checkTables_test.R: Cannot open: No such file or directory tar: pd.genomewidesnp.6/inst/UnitTests/runalltests.R: Cannot open: No such file or directory tar: pd.genomewidesnp.6/inst/UnitTests/runall.sh: Cannot open: No such file or directory tar: pd.genomewidesnp.6/R: Cannot mkdir: No space left on device tar: pd.genomewidesnp.6/R/all.R: Cannot open: No such file or directory tar: Error exit delayed from previous errors Fatal error: cannot mkdir R_TempDir * Installing to library '' ERROR: cannot write to or create directory ' My harddisk is not full, so I wounder if this version pd.genomewidesnp.6_0 is broken. (pd.genomewidesnp.6_0.4.2.tar.gz) morten > sessionInfo() R version 2.7.0 (2008-04-22) x86_64-unknown-linux-gnu locale: LC_CTYPE=en_US;LC_NUMERIC=C;LC_TIME=en_US;LC_COLLATE=en_US;LC_MONETARY =C;LC_MESSAGES=en_US;LC_PAPER=en_US;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHON E=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C attached base packages: [1] splines tools stats graphics grDevices utils datasets [8] methods base other attached packages: [1] oligo_1.4.0 oligoClasses_1.2.0 affxparser_1.12.2 [4] AnnotationDbi_1.2.1 preprocessCore_1.2.0 RSQLite_0.6-9 [7] DBI_0.2-4
• 1.6k views
ADD COMMENT •
0
Entering edit mode
rgentleman ★ 5.5k
@rgentleman-7725
Last seen 9.6 years ago
United States
Hi, Using biocLite (the recommended method), I had no problem, so I suspect that it is just fine, and that either issues due to incomplete downloading (check the size), or you are installing in some partition that is full. best wishes Robert Morten Mattingsdal wrote: > Hi, > > Ive just intstalled a fresh version of R 2.7.0 and want to run CRLMM on > ~780 Affymetrix chips. > When installing the subsequent platform design "pd.genomewidesnp.6_0" I > get the following errors: > > R CMD INSTALL pd.genomewidesnp.6_0.4.2.tar.gz > tar: pd.genomewidesnp.6/inst/extdata/pd.genomewidesnp.6.sqlite: Wrote > only 1024 of 10240 bytes > tar: Skipping to next header > tar: Archive contains obsolescent base-64 headers > tar: pd.genomewidesnp.6/inst/UnitTests: Cannot mkdir: No space left on > device > tar: pd.genomewidesnp.6/inst/UnitTests/crlmm_test.R: Cannot open: No > such file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/runfile.sh: Cannot open: No such > file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/Makefile: Cannot open: No such > file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/checkTables_test.R: Cannot open: > No such file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/runalltests.R: Cannot open: No > such file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/runall.sh: Cannot open: No such > file or directory > tar: pd.genomewidesnp.6/R: Cannot mkdir: No space left on device > tar: pd.genomewidesnp.6/R/all.R: Cannot open: No such file or directory > tar: Error exit delayed from previous errors > Fatal error: cannot mkdir R_TempDir > * Installing to library '' > ERROR: cannot write to or create directory ' > > My harddisk is not full, so I wounder if this version > pd.genomewidesnp.6_0 is broken. (pd.genomewidesnp.6_0.4.2.tar.gz) > morten > > > > > > sessionInfo() > R version 2.7.0 (2008-04-22) > x86_64-unknown-linux-gnu > > locale: > LC_CTYPE=en_US;LC_NUMERIC=C;LC_TIME=en_US;LC_COLLATE=en_US;LC_MONETA RY=C;LC_MESSAGES=en_US;LC_PAPER=en_US;LC_NAME=C;LC_ADDRESS=C;LC_TELEPH ONE=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C > > > attached base packages: > [1] splines tools stats graphics grDevices utils datasets > [8] methods base > other attached packages: > [1] oligo_1.4.0 oligoClasses_1.2.0 affxparser_1.12.2 [4] > AnnotationDbi_1.2.1 preprocessCore_1.2.0 RSQLite_0.6-9 [7] DBI_0.2-4 > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > -- Robert Gentleman, PhD Program in Computational Biology Division of Public Health Sciences Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N, M2-B876 PO Box 19024 Seattle, Washington 98109-1024 206-667-7700 rgentlem at fhcrc.org
ADD COMMENT •
0
Entering edit mode
Hi, Ive ran into some trouble here and it seems serious. After installing oligo and running justCRLMM with the freshly downloaded pd.genomewidesnp.6, the genotype calling went on fine for a couple of hours, using about 6GB of RAM. Since I forgot to use "nohup" (so R can work even if I close the shell terminal on the supercomputer), the process got killed by the OS. When I try to rerun the functions, R seems to have some serious trouble. The below segmentation fault occurs even when I try a fresh re-installation of R-2.7.0 and R-devel. Although this seems to be a fundamental memory handling error on this computer, independent of R/Biocondcutor, R is able to read multiple hgu133plus2 CEL files. From the error report below it seems that affxparser is involved somehow. Do anyone have any idea of what happened, and why affxparser is persistently dying independent of R versions? Would a simple restart be the solution? (not tried since this is a grid computer) morten *** caught segfault *** address 0x2a9f2d9cd9, cause 'memory not mapped' Traceback: 1: .Call("R_affx_get_cel_file_header", filename, PACKAGE = "affxparser") 2: readCelHeader(x) 3: FUN(c("ea07057_0349-01a_genomewidesnp_6_k5166_n2.cel", "ea07057_0349-01b_genomewidesnp_6_k5140.cel", "ea07057_0349-01d_genomewidesnp_6_k-5126.cel", "ea07057_0349-01e_genomewidesnp_6_k5152.cel", "ea07057_0349-01g_genomewidesnp_6_k5111.cel", "ea07057_0349-01h_genomewidesnp_6_k5269.cel", "ea07057_0349-02a_genomewidesnp_6_k5174.cel", "ea07057_0349-02f_genomewidesnp_6_k5138.cel", "ea07057_0349-02g_genomewidesnp_6_k-5262.cel", "ea07057_0351-01b_genomewidesnp_6_u504.cel", "ea07057_0351-01e_genomewidesnp_6_u007.cel", "ea07057_0351-01f_genomewidesnp_6_u-435.cel", "ea07057_0351-02a_genomewidesnp_6_u123.cel", "ea07057_0351-02b_genomewidesnp_6_u004.cel", "ea07057_0351-02e_genomewidesnp_6_u126.cel", "ea07057_0351-02g_genomewidesnp_6_u426.cel", "ea07057_0351-02h_genomewidesnp_6_u524.cel", "ea07057_0351-03a_genomewidesnp_6_u050.cel")[[9L]], ...) 4: lapply(X, FUN, ...) 5: sapply(filenames, function(x) readCelHeader(x)$chiptype) 6: read.celfiles(files) Possible actions: 1: abort (with core dump, if enabled) 2: normal R exit 3: exit R without saving workspace 4: exit R saving workspace Selection: > sessionInfo() R version 2.8.0 Under development (unstable) (2008-06-16 r45945) x86_64-unknown-linux-gnu locale: LC_CTYPE=en_US;LC_NUMERIC=C;LC_TIME=en_US;LC_COLLATE=en_US;LC_MONETARY =C;LC_MESSAGES=en_US;LC_PAPER=en_US;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHON E=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C attached base packages: [1] splines tools stats graphics grDevices utils datasets [8] methods base other attached packages: [1] oligo_1.5.3 oligoClasses_1.3.3 affxparser_1.13.3 [4] AnnotationDbi_1.3.5 preprocessCore_1.3.1 RSQLite_0.6-9 [7] DBI_0.2-4 Biobase_2.1.7
ADD REPLY •
0
Entering edit mode
Hi again, Ive managed to pinpoint the source of my problems, and I'm sorry for spamming the list. 1) It seems that reading from another disk-partition is not a good idea. 2) Somehow the computer managed to clean up its dirty memory and allowing me to mess it up again morten > Hi, > Ive ran into some trouble here and it seems serious. After installing > oligo and running justCRLMM with the freshly downloaded > pd.genomewidesnp.6, the genotype calling went on fine for a couple of > hours, using about 6GB of RAM. Since I forgot to use "nohup" (so R can > work even if I close the shell terminal on the supercomputer), the > process got killed by the OS. When I try to rerun the functions, R > seems to have some serious trouble. The below segmentation fault > occurs even when I try a fresh re-installation of R-2.7.0 and R-devel. > Although this seems to be a fundamental memory handling error on this > computer, independent of R/Biocondcutor, R is able to read multiple > hgu133plus2 CEL files. From the error report below it seems that > affxparser is involved somehow. > Do anyone have any idea of what happened, and why affxparser is > persistently dying independent of R versions? > Would a simple restart be the solution? (not tried since this is a > grid computer) > morten > > > > > > > *** caught segfault *** > address 0x2a9f2d9cd9, cause 'memory not mapped' > > Traceback: > 1: .Call("R_affx_get_cel_file_header", filename, PACKAGE = "affxparser") > 2: readCelHeader(x) > 3: FUN(c("ea07057_0349-01a_genomewidesnp_6_k5166_n2.cel", > "ea07057_0349-01b_genomewidesnp_6_k5140.cel", > "ea07057_0349-01d_genomewidesnp_6_k-5126.cel", > "ea07057_0349-01e_genomewidesnp_6_k5152.cel", > "ea07057_0349-01g_genomewidesnp_6_k5111.cel", > "ea07057_0349-01h_genomewidesnp_6_k5269.cel", > "ea07057_0349-02a_genomewidesnp_6_k5174.cel", > "ea07057_0349-02f_genomewidesnp_6_k5138.cel", > "ea07057_0349-02g_genomewidesnp_6_k-5262.cel", > "ea07057_0351-01b_genomewidesnp_6_u504.cel", > "ea07057_0351-01e_genomewidesnp_6_u007.cel", > "ea07057_0351-01f_genomewidesnp_6_u-435.cel", > "ea07057_0351-02a_genomewidesnp_6_u123.cel", > "ea07057_0351-02b_genomewidesnp_6_u004.cel", > "ea07057_0351-02e_genomewidesnp_6_u126.cel", > "ea07057_0351-02g_genomewidesnp_6_u426.cel", > "ea07057_0351-02h_genomewidesnp_6_u524.cel", > "ea07057_0351-03a_genomewidesnp_6_u050.cel")[[9L]], ...) > 4: lapply(X, FUN, ...) > 5: sapply(filenames, function(x) readCelHeader(x)$chiptype) > 6: read.celfiles(files) > > Possible actions: > 1: abort (with core dump, if enabled) > 2: normal R exit > 3: exit R without saving workspace > 4: exit R saving workspace > Selection: > > > sessionInfo() > R version 2.8.0 Under development (unstable) (2008-06-16 r45945) > x86_64-unknown-linux-gnu > > locale: > LC_CTYPE=en_US;LC_NUMERIC=C;LC_TIME=en_US;LC_COLLATE=en_US;LC_MONETA RY=C;LC_MESSAGES=en_US;LC_PAPER=en_US;LC_NAME=C;LC_ADDRESS=C;LC_TELEPH ONE=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C > > > attached base packages: > [1] splines tools stats graphics grDevices utils datasets > [8] methods base > other attached packages: > [1] oligo_1.5.3 oligoClasses_1.3.3 affxparser_1.13.3 [4] > AnnotationDbi_1.3.5 preprocessCore_1.3.1 RSQLite_0.6-9 [7] > DBI_0.2-4 Biobase_2.1.7 > > >
ADD REPLY •
0
Entering edit mode
Hi Morten Most likely this happens because one of your CEL files are corrupted somehow. affxparser segfaults when it tries to read a corrupted file. The easiest way to detect this is to do something like celfiles = "" # This should be a character vector of your CEL file names for(cel in celfiles) { print(cel) readCelHeader(cel) } That way you can identify the culprit. ANother possibility is that something is wrong with affxparser, but it is quite widely used, so for now I will stick to the first explanation. Could you report back your findings. Kasper On Jun 17, 2008, at 5:03 PM, Morten Mattingsdal wrote: > Hi, > Ive ran into some trouble here and it seems serious. After > installing oligo and running justCRLMM with the freshly downloaded > pd.genomewidesnp.6, the genotype calling went on fine for a couple > of hours, using about 6GB of RAM. Since I forgot to use "nohup" (so > R can work even if I close the shell terminal on the supercomputer), > the process got killed by the OS. When I try to rerun the functions, > R seems to have some serious trouble. The below segmentation fault > occurs even when I try a fresh re-installation of R-2.7.0 and R-devel. > Although this seems to be a fundamental memory handling error on > this computer, independent of R/Biocondcutor, R is able to read > multiple hgu133plus2 CEL files. From the error report below it seems > that affxparser is involved somehow. > Do anyone have any idea of what happened, and why affxparser is > persistently dying independent of R versions? > Would a simple restart be the solution? (not tried since this is a > grid computer) > morten > > > > > > > *** caught segfault *** > address 0x2a9f2d9cd9, cause 'memory not mapped' > > Traceback: > 1: .Call("R_affx_get_cel_file_header", filename, PACKAGE = > "affxparser") > 2: readCelHeader(x) > 3: FUN(c("ea07057_0349-01a_genomewidesnp_6_k5166_n2.cel", > "ea07057_0349-01b_genomewidesnp_6_k5140.cel", > "ea07057_0349-01d_genomewidesnp_6_k-5126.cel", > "ea07057_0349-01e_genomewidesnp_6_k5152.cel", > "ea07057_0349-01g_genomewidesnp_6_k5111.cel", > "ea07057_0349-01h_genomewidesnp_6_k5269.cel", > "ea07057_0349-02a_genomewidesnp_6_k5174.cel", > "ea07057_0349-02f_genomewidesnp_6_k5138.cel", > "ea07057_0349-02g_genomewidesnp_6_k-5262.cel", > "ea07057_0351-01b_genomewidesnp_6_u504.cel", > "ea07057_0351-01e_genomewidesnp_6_u007.cel", > "ea07057_0351-01f_genomewidesnp_6_u-435.cel", > "ea07057_0351-02a_genomewidesnp_6_u123.cel", > "ea07057_0351-02b_genomewidesnp_6_u004.cel", > "ea07057_0351-02e_genomewidesnp_6_u126.cel", > "ea07057_0351-02g_genomewidesnp_6_u426.cel", > "ea07057_0351-02h_genomewidesnp_6_u524.cel", > "ea07057_0351-03a_genomewidesnp_6_u050.cel")[[9L]], ...) > 4: lapply(X, FUN, ...) > 5: sapply(filenames, function(x) readCelHeader(x)$chiptype) > 6: read.celfiles(files) > > Possible actions: > 1: abort (with core dump, if enabled) > 2: normal R exit > 3: exit R without saving workspace > 4: exit R saving workspace > Selection: > > > sessionInfo() > R version 2.8.0 Under development (unstable) (2008-06-16 r45945) > x86_64-unknown-linux-gnu > > locale: > LC_CTYPE > = > en_US > ;LC_NUMERIC > = > C > ;LC_TIME > = > en_US > ;LC_COLLATE > = > en_US > ;LC_MONETARY > = > C > ;LC_MESSAGES > = > en_US > ;LC_PAPER > = > en_US > ;LC_NAME > = > C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C > > attached base packages: > [1] splines tools stats graphics grDevices utils > datasets > [8] methods base > other attached packages: > [1] oligo_1.5.3 oligoClasses_1.3.3 affxparser_1.13.3 [4] > AnnotationDbi_1.3.5 preprocessCore_1.3.1 RSQLite_0.6-9 [7] > DBI_0.2-4 Biobase_2.1.7 > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD REPLY •
0
Entering edit mode
@vincent-j-carey-jr-4
Last seen 9 weeks ago
United States
your hard disk may not be full but your temp space seems to be full. perhaps you need to reset the path where R writes temporary files -- check the administrator's manual --- Vince Carey, PhD Assoc. Prof Med (Biostatistics) Harvard Medical School Channing Laboratory - ph 6175252265 fa 6177311541 181 Longwood Ave Boston MA 02115 USA stvjc at channing.harvard.edu On Tue, 17 Jun 2008, Morten Mattingsdal wrote: > Hi, > > Ive just intstalled a fresh version of R 2.7.0 and want to run CRLMM on > ~780 Affymetrix chips. > When installing the subsequent platform design "pd.genomewidesnp.6_0" I > get the following errors: > > R CMD INSTALL pd.genomewidesnp.6_0.4.2.tar.gz > tar: pd.genomewidesnp.6/inst/extdata/pd.genomewidesnp.6.sqlite: Wrote > only 1024 of 10240 bytes > tar: Skipping to next header > tar: Archive contains obsolescent base-64 headers > tar: pd.genomewidesnp.6/inst/UnitTests: Cannot mkdir: No space left on > device > tar: pd.genomewidesnp.6/inst/UnitTests/crlmm_test.R: Cannot open: No > such file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/runfile.sh: Cannot open: No such > file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/Makefile: Cannot open: No such > file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/checkTables_test.R: Cannot open: > No such file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/runalltests.R: Cannot open: No > such file or directory > tar: pd.genomewidesnp.6/inst/UnitTests/runall.sh: Cannot open: No such > file or directory > tar: pd.genomewidesnp.6/R: Cannot mkdir: No space left on device > tar: pd.genomewidesnp.6/R/all.R: Cannot open: No such file or directory > tar: Error exit delayed from previous errors > Fatal error: cannot mkdir R_TempDir > * Installing to library '' > ERROR: cannot write to or create directory ' > > My harddisk is not full, so I wounder if this version > pd.genomewidesnp.6_0 is broken. (pd.genomewidesnp.6_0.4.2.tar.gz) > morten > > > > > > sessionInfo() > R version 2.7.0 (2008-04-22) > x86_64-unknown-linux-gnu > > locale: > LC_CTYPE=en_US;LC_NUMERIC=C;LC_TIME=en_US;LC_COLLATE=en_US;LC_MONETA RY=C;LC_MESSAGES=en_US;LC_PAPER=en_US;LC_NAME=C;LC_ADDRESS=C;LC_TELEPH ONE=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C > > attached base packages: > [1] splines tools stats graphics grDevices utils datasets > [8] methods base > > other attached packages: > [1] oligo_1.4.0 oligoClasses_1.2.0 affxparser_1.12.2 > [4] AnnotationDbi_1.2.1 preprocessCore_1.2.0 RSQLite_0.6-9 > [7] DBI_0.2-4 > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor > The information transmitted in this electronic communica...{{dropped:10}}
ADD COMMENT •
0
Entering edit mode
Hi, Yes, indeed. The /tmp partition was full. Ive changed it using TMPDIR export TMPDIR=/new/tmp thanks morten > your hard disk may not be full but your temp space seems to be full. > perhaps you need to reset the path where R writes temporary files -- > check the administrator's manual > > --- > Vince Carey, PhD > Assoc. Prof Med (Biostatistics) > Harvard Medical School > Channing Laboratory - ph 6175252265 fa 6177311541 > 181 Longwood Ave Boston MA 02115 USA > stvjc at channing.harvard.edu > > On Tue, 17 Jun 2008, Morten Mattingsdal wrote: > > >> Hi, >> >> Ive just intstalled a fresh version of R 2.7.0 and want to run CRLMM on >> ~780 Affymetrix chips. >> When installing the subsequent platform design "pd.genomewidesnp.6_0" I >> get the following errors: >> >> R CMD INSTALL pd.genomewidesnp.6_0.4.2.tar.gz >> tar: pd.genomewidesnp.6/inst/extdata/pd.genomewidesnp.6.sqlite: Wrote >> only 1024 of 10240 bytes >> tar: Skipping to next header >> tar: Archive contains obsolescent base-64 headers >> tar: pd.genomewidesnp.6/inst/UnitTests: Cannot mkdir: No space left on >> device >> tar: pd.genomewidesnp.6/inst/UnitTests/crlmm_test.R: Cannot open: No >> such file or directory >> tar: pd.genomewidesnp.6/inst/UnitTests/runfile.sh: Cannot open: No such >> file or directory >> tar: pd.genomewidesnp.6/inst/UnitTests/Makefile: Cannot open: No such >> file or directory >> tar: pd.genomewidesnp.6/inst/UnitTests/checkTables_test.R: Cannot open: >> No such file or directory >> tar: pd.genomewidesnp.6/inst/UnitTests/runalltests.R: Cannot open: No >> such file or directory >> tar: pd.genomewidesnp.6/inst/UnitTests/runall.sh: Cannot open: No such >> file or directory >> tar: pd.genomewidesnp.6/R: Cannot mkdir: No space left on device >> tar: pd.genomewidesnp.6/R/all.R: Cannot open: No such file or directory >> tar: Error exit delayed from previous errors >> Fatal error: cannot mkdir R_TempDir >> * Installing to library '' >> ERROR: cannot write to or create directory ' >> >> My harddisk is not full, so I wounder if this version >> pd.genomewidesnp.6_0 is broken. (pd.genomewidesnp.6_0.4.2.tar.gz) >> morten >> >> >> >> >> > sessionInfo() >> R version 2.7.0 (2008-04-22) >> x86_64-unknown-linux-gnu >> >> locale: >> LC_CTYPE=en_US;LC_NUMERIC=C;LC_TIME=en_US;LC_COLLATE=en_US;LC_MONET ARY=C;LC_MESSAGES=en_US;LC_PAPER=en_US;LC_NAME=C;LC_ADDRESS=C;LC_TELEP HONE=C;LC_MEASUREMENT=en_US;LC_IDENTIFICATION=C >> >> attached base packages: >> [1] splines tools stats graphics grDevices utils datasets >> [8] methods base >> >> other attached packages: >> [1] oligo_1.4.0 oligoClasses_1.2.0 affxparser_1.12.2 >> [4] AnnotationDbi_1.2.1 preprocessCore_1.2.0 RSQLite_0.6-9 >> [7] DBI_0.2-4 >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >> >> > > The information transmitted in this electronic communi...{{dropped:14}}
ADD REPLY •

Login before adding your answer.

Similar Posts
Loading Similar Posts
Traffic: 913 users visited in the last hour
Content Search
Users
Tags
Badges
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6